BigRed350x Posted June 24, 2012 Report Posted June 24, 2012 I'm moving on to another project. The Cheetah has to go before the next one can start though. No Trades. Pay-pal or Cash in Person only. I'm NOT parting it out I can deliver within about 500miles of Cheyenne, WY. Any farther away than that and its up to you to figure out shipping & all that. This isn't everything, but its the major stuff... I'm 230lbs and this thing hauls my fat ass around with ease. I can get you pics of whatever you want to see on the bike. Nothing at all wrong with it, fires up and ready to ride right now. I'm not in a hurry to sell it. Ridiculous low-ball offers will not be responded to and deleted, so don't waste your time or mine. I run the bike pretty stupid fat on meth and purge it every time I'm done riding. Change trans fluid every other ride. I built the engine in January and it sat until summer time. Its been out to the dunes about 5 times now. Check out the video & you can see how it runs... If you are close to Wyoming I would be happy to meet up with you and let you test-ride it. $5000 Or best REASONABLE offer. Engine: 485 Powervalve Cheetah • 73mm Powervalve Cheetah cylinders ported by Brandon @ Wildcard Racing • New 423M07300 Wiseco Pistons & the old trinity pistons still in good shape if you want them. • Domes cut by Tim Bond @ Titan Racing 12.5:1 Compression Ratio • Vforce3 reeds • Upp Intakes for 33-36mm carbs • New style cheetah head (uses DM domes) • 4mil Hotrods crank trued and welded • Maxload Bearings on both ends of crank • Adjustable Timing Plate w/ Stock Stator • Stock Flywheel • Hinson Spring-Loaded Billet Basket • Hinson Straight-Cut Gears • Billet Water-Pump • Pancake Bearing • Direct-Drive Lockup & 12-bolt cover • All 6 gears side-cut on transmission • 2nd bearing on shift-drum • Shift-Pro Kit • Shift-Shaft mod • Matching cases bored and port-matched to cheetah cylinders and plastic-bead-blasted • Cascade billet stator-cover • Keihin 34PJ on methanol • Chariot Billet bowls • .118 mains / dumps • 68 Pilots • Clippard powerjets • EGL Needles • Shearer BB / SF / IF Pipes cut and welded to fit correctly & stingers cut and re-welded to clear air filters • All new seals & all transmission bearings replaced with new OEM bearings Chassis • Lightened stock frame (44lbs) • Braided stainless brake lines - Front & Rear • +2+1 LSR Chrome A-Arms (New style - fully adjustable) with ball joints • Works Dual-Rates w/ remote resevoirs • +8 Metal Tech Chrome Swingarm • TCS Rebuilt / Revalved Rear shock w/ Eibach Spring • +4 Durablue Axle w/ Locking snap-ring style main nut • IMS Pegs • 21x7x10 Skat Trak Fronts on douglas blue-label rims • 21x12x8 9-Paddle Single-Buff Extremes on douglas blue-label rims • LSR Chrome Anti-Vibe steering stem • Tusk Fat-Bars • ODI Grips • Billet Thumb-Throttle Lever • YFZ450 Front Brake Master Cylinder • ASV Clutch-Lever • Pingel Fuel Valve • Billet Gas Cap • 15x41 Gearing VIDEO! Updated Pics! PICS! Quote
ban565 Posted June 25, 2012 Report Posted June 25, 2012 Hey Bigred, you finally going to build a massive twister motor? Nice quad it should sell soon. See you on the Oregon dunes someday. Quote
BigRed350x Posted June 25, 2012 Author Report Posted June 25, 2012 Hey Bigred, you finally going to build a massive twister motor? Nice quad it should sell soon. See you on the Oregon dunes someday. Nothing huge... I honestly have more fun building them than I do riding them. Quote
theshee Posted June 25, 2012 Report Posted June 25, 2012 If I wanted back in the sport just a little more I'd snag it. Beautiful bike! Quote
BigRed350x Posted June 25, 2012 Author Report Posted June 25, 2012 If I wanted back in the sport just a little more I'd snag it. Beautiful bike! Sweet ride brother Thanks guys! I'm willing to deliver! This thing is a beast! It would go good on those coal hills back east. Quote
BigRed350x Posted June 25, 2012 Author Report Posted June 25, 2012 I threw it up on egay to see if anyone out there would happen to do the buy it now thing... LOL! http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280908578701 Reserve is set at my asking price of $5200 Quote
MarineNYC Posted June 28, 2012 Report Posted June 28, 2012 You know anybody that wants a long travel trx. All done up. I would love this shee. Quote
BigRed350x Posted June 28, 2012 Author Report Posted June 28, 2012 You know anybody that wants a long travel trx. All done up. I would love this shee. I don't. Sorry man. All my buddies are 2-stroke guys. I'll keep an eye out for anyone looking for a TRX though. Thanks, Jared Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.