BigRed350x Posted June 24, 2012 Report Share Posted June 24, 2012 I'm moving on to another project. The Cheetah has to go before the next one can start though. No Trades. Paypal or Cash in Person only. I'm NOT parting it out I can deliver within about 500miles of Cheyenne, WY. Any farther away than that and its up to you to figure out shipping & all that. This isn't everything, but its the major stuff... I'm 230lbs and this thing hauls my fat ass around with ease. I can get you pics of whatever you want to see on the bike. Nothing at all wrong with it, fires up and ready to ride right now. I'm not in a hurry to sell it. Ridiculous low-ball offers will not be responded to and deleted, so don't waste your time or mine. I run the bike pretty stupid fat on meth and purge it every time I'm done riding. Change trans fluid every other ride. I built the engine in january and it sat until summer time. Its been out to the dunes about 5 times now. Check out the video & you can see how it runs... If you are close to wyoming I would be happy to meet up with you and let you test-ride it. $5200 Or best REASONABLE offer. Engine: 485 Powervalve Cheetah • 73mm Powervalve Cheetah cylinders ported by Brandon @ Wildcard Racing • New 423M07300 Wiseco Pistons & the old trinity pistons still in good shape if you want them • Domes cut by Tim Bond @ Titan Racing 12.5:1 Compression Ratio • Vforce3 reeds • Upp Intakes for 33-36mm carbs • New style cheetah head (uses DM domes) • 4mil Hotrods crank trued and welded • Maxload Bearings on both ends of crank • Adjustable Timing Plate w/ Stock Stator • Stock Flywheel • Hinson Spring-Loaded Billet Basket • Hinson Straight-Cut Gears • Billet Water-Pump • Pancake Bearing • Direct-Drive Lockup & 12-bolt cover • All 6 gears side-cut on transmission • 2nd bearing on shift-drum • Shift-Pro Kit • Shift-Shaft mod • Matching cases bored and port-matched to cheetah cylinders and plastic-bead-blasted • Cascade billet stator-cover • Keihin 34PJ on methanol • Chariot Billet bowls • .118 mains / dumps • 68 Pilots • Clippard powerjets • EGL Needles • Shearer BB / SF / IF Pipes cut and welded to fit correctly & stingers cut and re-welded to clear air filters • All new seals & all transmission bearings replaced with new OEM bearings Chassis • Lightened stock frame (44lbs) • Braided stainless brake lines - Front & Rear • +2+1 LSR Chrome A-Arms (New style - fully adjustable) with ball joints • Works Dual-Rates w/ remote resevoirs • +8 Metal Tech Chrome Swingarm • TCS Rebuilt / Revalved Rear shock w/ Eibach Spring • +4 Durablue Axle w/ Locking snap-ring style main nut • IMS Pegs • 21x7x10 Skat Trak Fronts on douglas blue-label rims • 21x12x8 9-Paddle Single-Buff Extremes on douglas blue-label rims • LSR Chrome Anti-Vibe steering stem • Tusk Fat-Bars • ODI Grips • Billet Thumb-Throttle Lever • YFZ450 Front Brake Master Cylinder • ASV Clutch-Lever • Pingel Fuel Valve • Billet Gas Cap • 15x41 Gearing VIDEO! PICS! Quote Link to comment Share on other sites More sharing options...
lms1977 Posted June 24, 2012 Report Share Posted June 24, 2012 Sweet bike !!! I like the tree shots Good luck with the sale looks like a good price Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted June 24, 2012 Author Report Share Posted June 24, 2012 Sweet bike !!! I like the tree shots Good luck with the sale looks like a good price Thanks man! - Jared Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted June 24, 2012 Report Share Posted June 24, 2012 Now THAT is an excellent for sale post. Nothing left out and in great detail. I should use that for an example post. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted June 24, 2012 Author Report Share Posted June 24, 2012 Now THAT is an excellent for sale post. Nothing left out and in great detail. I should use that for an example post. That would be cool! Thanks man! - Jared Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted June 26, 2012 Author Report Share Posted June 26, 2012 Alright, aparently some of you noobs are fucking retarded and can't read so I will say it again... I AM NOT PARTING IT OUT !!! Quote Link to comment Share on other sites More sharing options...
Bkm2006 Posted June 26, 2012 Report Share Posted June 26, 2012 I'll take the gas cap! Ha j/k !! That's a sweet bike, good luck with the sale! Quote Link to comment Share on other sites More sharing options...
sandman125 Posted June 26, 2012 Report Share Posted June 26, 2012 Can this machine be set up for gas? Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted June 26, 2012 Author Report Share Posted June 26, 2012 Can this machine be set up for gas? Yes. Quote Link to comment Share on other sites More sharing options...
Nieskes Posted June 26, 2012 Report Share Posted June 26, 2012 Alright, aparently some of you noobs are fucking retarded and can't read so I will say it again... I AM NOT PARTING IT OUT !!! Well it is in the parts section, Bump for a nice ass bike! Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted June 27, 2012 Author Report Share Posted June 27, 2012 Well it is in the parts section, Bump for a nice ass bike! Yeah, I threw it in the complete bike section too. I just posted it here for views. A lot of people don't make it into the complete bikes section. But it states very clearly at the top that I am not parting it out and I've gotton a handfull of PM's from people wanting individual parts off the bike. - Jared Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted June 27, 2012 Report Share Posted June 27, 2012 Alright, aparently some of you noobs are fucking retarded and can't read so I will say it again... I AM NOT PARTING IT OUT !!! Well, if you change your mind I would be more then interested in the COMPLETE motor. Filters to exhaust and everything in between. Leaving you with a decent roller to still sell. I know it won't be a steal, so if you break down, let me know. Quote Link to comment Share on other sites More sharing options...
theshee Posted June 30, 2012 Report Share Posted June 30, 2012 ttt Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted June 30, 2012 Author Report Share Posted June 30, 2012 ttt Thanks for the bump man! Quote Link to comment Share on other sites More sharing options...
87sheerips Posted July 2, 2012 Report Share Posted July 2, 2012 bump for awesome machine. glws bud Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.