Jump to content

What clip do I need on a replacement drive shaft?


Recommended Posts

The drive shaft the one that that front sprocket bolts too. The opposite end the last ring land it was all chipped away and had missing hardware. I got a replacement and ordered a new washer and c clip. I got it and it fits the next ring land in. Not the outer. Is it suppose to be a half clip? Take a look at the fiche.

 

http://www.donandroys.com/fiche_section_detail.asp?section=957396&category=ATVs&make=YAMAHA&year=1987&fveh=26185

Link to comment
Share on other sites

Out of curiousity, I just checked. I have a Blaster and a Banshee kick lever here. The Blaster lever will fit the Banshee stub piece. (Or whatever it's called) The Blaster foot pad part is about an inch or so farther outboard. Don't know if this is good or bad. It's obvious that it won't hit the footpeg and stop like the Banshee lever. Try it and let us know how you like it. You need an impact driver to get it apart. Be careful not to lose the ball and spring.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...