RACxEMxWILLIE Posted June 20, 2012 Report Share Posted June 20, 2012 (edited) Need some for a replacement. My handlebars and wheels have a lot of play in them. Also, need some AM upper and lower A-arm ball joints. Need some for under 50 if possible. Edited June 20, 2012 by RACxEMxWILLIE Quote Link to comment Share on other sites More sharing options...
Zwiser Posted June 20, 2012 Report Share Posted June 20, 2012 A arm ball joints aren't replaceable. Are you sure that you a arm joints are bad? Really if you only have steering slop its probably just the tie rod ends... you can pick just the ends up for under $30 and you might as well replace them steering stem bearing while your down there its about $12 Quote Link to comment Share on other sites More sharing options...
RACxEMxWILLIE Posted June 21, 2012 Author Report Share Posted June 21, 2012 A arm ball joints aren't replaceable. Are you sure that you a arm joints are bad? Really if you only have steering slop its probably just the tie rod ends... you can pick just the ends up for under $30 and you might as well replace them steering stem bearing while your down there its about $12 Awesome. They had a little play in the wheels from side to side and knew that was the tie rods. I actually didn't check the upper and lower ball joints. I actually didn't know they couldn't be replaced. Thanks for the heads up. Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted June 21, 2012 Report Share Posted June 21, 2012 check the hubs bearing too. Quote Link to comment Share on other sites More sharing options...
quadpro26 Posted June 21, 2012 Report Share Posted June 21, 2012 i have some tie rod ends and rods $40 shipped Quote Link to comment Share on other sites More sharing options...
toytech Posted June 26, 2012 Report Share Posted June 26, 2012 A arm ball joints aren't replaceable. Are you sure that you a arm joints are bad? Really if you only have steering slop its probably just the tie rod ends... you can pick just the ends up for under $30 and you might as well replace them steering stem bearing while your down there its about $12 he has aftermarket arms Quote Link to comment Share on other sites More sharing options...
quadpro26 Posted June 27, 2012 Report Share Posted June 27, 2012 so really he needs just ends Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.