Nik Posted June 19, 2012 Report Share Posted June 19, 2012 changed the reeds on my 2000 banshee, got rid of the TORs and put the eliminator kit on, cleaned the carbs and placed everything back together...now the thing doesnt start..ive got no spark but this has me thrown for a loop because prior to doing this the thing started right up with the first 2 kicks..ive touched nothing having to do with the electronics..where should i start?? all wires are hooked up and all my grounds are good...need help as im at the last stretch to getting this thing back and running Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted June 19, 2012 Report Share Posted June 19, 2012 Disconnect the box under the gas tank?? Quote Link to comment Share on other sites More sharing options...
runflat Posted June 19, 2012 Report Share Posted June 19, 2012 sounds stupid, but check your on/off switch, and if you have a key, make sure the socket is securely attached to the back... Quote Link to comment Share on other sites More sharing options...
tarmacsti Posted June 19, 2012 Report Share Posted June 19, 2012 +1 on the black box under the tank! Quote Link to comment Share on other sites More sharing options...
Nik Posted June 19, 2012 Author Report Share Posted June 19, 2012 appreciate it guys, on and off switch was ok and the black box was connected...Ended up being the old harness's for the TORS...had a hunch so plugged the TORS back in even with the new eliminator kit installed and the thing fired up after 3 kicks...cut the wires from the connectors back, tied them together and capped them...now shes screaming again Quote Link to comment Share on other sites More sharing options...
Starwriter Posted June 19, 2012 Report Share Posted June 19, 2012 Like others mentioned, unplug the TORS box under the left front of the tank. Leaving it plugged in and hacking the wires is just asking for trouble. Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted June 20, 2012 Report Share Posted June 20, 2012 appreciate it guys, on and off switch was ok and the black box was connected...Ended up being the old harness's for the TORS...had a hunch so plugged the TORS back in even with the new eliminator kit installed and the thing fired up after 3 kicks...cut the wires from the connectors back, tied them together and capped them...now shes screaming again Well.....you just hacked your harness and paid the money for the eliminator kit just to basically REACTIVATE your TORS. What everybody is saying is UNPLUG THE BLOCK BOX.....it's under your gas tank on the left side. It is the TORS brain box. All you have to do is unplug it and you disable the entire TORS system. What you did was just put the system into a loop again. And if that shorts your gonna be mad all over again. Quote Link to comment Share on other sites More sharing options...
Nik Posted June 20, 2012 Author Report Share Posted June 20, 2012 Will do Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.