87sheerips Posted June 12, 2012 Report Share Posted June 12, 2012 Yes I bottom out my Shee all the time and beat it up... But most do. This happened last weekend and just about wrecked. Be careful! I replaced with grade 8 on the uppers... The stainless bolt sheared, figured I would share. Quote Link to comment Share on other sites More sharing options...
mike0chek Posted June 12, 2012 Report Share Posted June 12, 2012 shit that could have turned nasty fast Quote Link to comment Share on other sites More sharing options...
SandmanPNW Posted June 12, 2012 Report Share Posted June 12, 2012 is that SS bolt from alloyboltz? or same type? though i imagine there is double the stress on that 1 bolt vs a arm frame MMATV? Quote Link to comment Share on other sites More sharing options...
87sheerips Posted June 12, 2012 Author Report Share Posted June 12, 2012 Yes from MMATV.... But nothing against them or the kit itself...the kit is great.. It's just that stainless is not as strong as carbon steel. Bottom line. I will run stainless everywhere else but this upper bolt. --- I am here: http://tapatalk.com/map.php?y34eix Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted July 6, 2012 Report Share Posted July 6, 2012 Prime warning JD, never use the stainless bolts that come in the kits for a arms. They WILL shear even on some drag bikes that get in to the choppy stuff. Just polish the stockers or equivalent. Also, stay away from the titanium in the critical pivot points. Titanium has no give and eventually just cracks or shears. The pro riders use all titanium, but in critical pivot points. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.