erickson483 Posted May 24, 2012 Report Share Posted May 24, 2012 I'm really paranoid after my build, just to warn you all. Here are my plugs after she warmed up about 3 or 4 times and then driven for about 2 min in 2nd gear. What do you think? The left plug came from the left side and the right came from the right. Quote Link to comment Share on other sites More sharing options...
voodoo69 Posted May 24, 2012 Report Share Posted May 24, 2012 i would say she is running a bit lean fatten her up just a little Quote Link to comment Share on other sites More sharing options...
erickson483 Posted May 24, 2012 Author Report Share Posted May 24, 2012 Turn air screws in? Quote Link to comment Share on other sites More sharing options...
voodoo69 Posted May 24, 2012 Report Share Posted May 24, 2012 your air screws should be somewhere around 1 to 1.5 turns out try bigger jets Quote Link to comment Share on other sites More sharing options...
erickson483 Posted May 24, 2012 Author Report Share Posted May 24, 2012 (edited) I should have specified. I'm at 1.5 turns out, 27.5 pilots middle clip on the needle, 800ft elevation, 80 degrees, no lid, 310 on the main but will be going down after if chops. No motor mods, just pipes and reeds really Edited May 24, 2012 by erickson483 Quote Link to comment Share on other sites More sharing options...
erickson483 Posted May 24, 2012 Author Report Share Posted May 24, 2012 I went to 1 turn out instead of 1.5 and the plugs both are a light brown. I'm also getting more smoke out of the pipes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.