hunt3rm008 Posted May 17, 2012 Report Share Posted May 17, 2012 i got a 1995 banshee that was a rolling chassis and the motor out that needed a topend rebuilt. now looking through the parts i got, the electrical is missing the control unit, and the ignition switch(key). i will buy the control unit, but was wondering if i could still start my banshee when its all put together without the ignition key Quote Link to comment Share on other sites More sharing options...
yzrmbsg Posted May 17, 2012 Report Share Posted May 17, 2012 Yes, you can, here's the shematic for when you get to it, just solder/crimp the 2 wires together and you wont need the key. Sent using Tapatalk! Quote Link to comment Share on other sites More sharing options...
Nightmare Posted May 17, 2012 Report Share Posted May 17, 2012 Or u can just unplug the key switch harness from the main harness Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted May 17, 2012 Report Share Posted May 17, 2012 Or u can just unplug the key switch harness from the main harness You have to connect the red/black and the black wires together!!!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
DirtDiggler69 Posted May 20, 2012 Report Share Posted May 20, 2012 I just did this as well . My wiring harness is Like frankensteins monster , I'd really like to just make a new harness that eliminates all the bs and looks clean . It looks pretty simple , and having the factory plugs will help . Anyone done their own rebuild on the harness? Any pitfalls ( Atari baby!!!!! ) to look out for? Quote Link to comment Share on other sites More sharing options...
banshee352savage Posted May 28, 2012 Report Share Posted May 28, 2012 I got rid of everything extra on my 95. Just enough to run. I even got rid of the regulator. Just take your time with the harness and start taking out what you don't need. If you are not using lights you don't even need to hook up the two wires coming from your stator. The only switch I have left is the key switch. Quote Link to comment Share on other sites More sharing options...
thomas h. Posted May 28, 2012 Report Share Posted May 28, 2012 I googled banshee wire harness and got a pic of a stripped harness jut the minimum first attempt worked perfect. http://www.bansheehq.com/forums/uploads/monthly_09_2008/post-14920-1222470122_thumb.jpg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.