badseed Posted May 14, 2012 Report Share Posted May 14, 2012 i have removed everything on this damn thing... but i cant seem to get these jugs to pop loose for nothin. someone pls help Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted May 14, 2012 Report Share Posted May 14, 2012 Did you use a hammer? pull up on the intake side and hit the exhaust side. A RUBBER MALLET! Quote Link to comment Share on other sites More sharing options...
ClayAiken Posted May 14, 2012 Report Share Posted May 14, 2012 Sure you didnt miss a bolt? Just use a sledge hammer. Quote Link to comment Share on other sites More sharing options...
yamahaty Posted May 14, 2012 Report Share Posted May 14, 2012 Sure you didnt miss a bolt? Just use a sledge hammer. hit all corners with a rubber mallet, should come off Quote Link to comment Share on other sites More sharing options...
badseed Posted May 15, 2012 Author Report Share Posted May 15, 2012 allllrighty then i got them suckers off finally ......... now does ant bodyknow where to get a topend rebuild kit and get my jugs bored out? i found someone to bore it out and give me the whole top end (pistons rings gasket kit berings) for 275 is that a good deal???? Quote Link to comment Share on other sites More sharing options...
bball23 Posted May 17, 2012 Report Share Posted May 17, 2012 yea good deal if theyre wiseco pistons.. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted May 17, 2012 Report Share Posted May 17, 2012 allllrighty then i got them suckers off finally ......... now does ant bodyknow where to get a topend rebuild kit and get my jugs bored out? i found someone to bore it out and give me the whole top end (pistons rings gasket kit berings) for 275 is that a good deal???? I'd use Kevin @ HJR. His number is in my signature. Great guy to deal with. He does good work with fast turnaround time. - Jared Quote Link to comment Share on other sites More sharing options...
wreck Posted May 17, 2012 Report Share Posted May 17, 2012 I think that you can find a better deal....I need new top end also.....check out ebay...wiseco pistons and vitos are about 199.00 dollars. Quote Link to comment Share on other sites More sharing options...
Chip M Posted May 17, 2012 Report Share Posted May 17, 2012 275 for the kit and a bore job is cheap. I cannot see how they could be wiseco product. Do yourself a favor and listen to BigRed. Use a site sponser. They know banshee's well and do good work for good prices. Watch out for ebay there are many places that sell misfit brand name products. You do not want the pistons that the manufacturer would not sell themselves because they did not pass inspection. Ebay sucks, just my opinion of course!!. Good luck Quote Link to comment Share on other sites More sharing options...
badseed Posted May 18, 2012 Author Report Share Posted May 18, 2012 275 for the kit and a bore job is cheap. I cannot see how they could be wiseco product. Do yourself a favor and listen to BigRed. Use a site sponser. They know banshee's well and do good work for good prices. Watch out for ebay there are many places that sell misfit brand name products. You do not want the pistons that the manufacturer would not sell themselves because they did not pass inspection. Ebay sucks, just my opinion of course!!. Good luck i was looking and the pistons they would use is prox or somethin like that the wiseco would be an extra 100 bucks its out of a place in michigan wich is close to home .... @ bigred where is this guy located at abd whats he charge for a bore job and topend kit Quote Link to comment Share on other sites More sharing options...
hp2000 Posted May 18, 2012 Report Share Posted May 18, 2012 Theres a couple guys selling ported top ends ready to go in the for sale section.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.