jayc Posted May 4, 2012 Report Share Posted May 4, 2012 Anyone try mixing a little nitro with meth? maybe 5% or 10% of nitro 50 VP Quote Link to comment Share on other sites More sharing options...
ginger Posted May 4, 2012 Report Share Posted May 4, 2012 i have in 4 stroke applications, but never on a 2 stroke app. if you do, you will definatly need to rejet Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted May 4, 2012 Report Share Posted May 4, 2012 Go look in the drag section. This was covered in decent detail. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted May 5, 2012 Report Share Posted May 5, 2012 Mix it at 50% and drop 10 main jet sizes and you are good to go. Truth. Quote Link to comment Share on other sites More sharing options...
Coupelx Posted May 5, 2012 Report Share Posted May 5, 2012 Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted May 5, 2012 Report Share Posted May 5, 2012 Mix it at 50% and drop 10 main jet sizes and you are good to go. Truth. Lean is mean!! Quote Link to comment Share on other sites More sharing options...
RadarRacing Posted May 5, 2012 Report Share Posted May 5, 2012 It works quite well in nitro cars at 20-32% and the other part of nitro fuel is methanol. Nitro has a tendency to fire before any spark in most other applications unless the engine is built for it. If I were wanting to play with it I think I would have very loose squish clearance and fairly low compression and not mix it with gas , only alky/ methanol. I know a few guys that used it a few years ago and they gave it up. Mostly due to engine failures and piston siezures. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.