joshuadgallardo Posted May 2, 2012 Report Share Posted May 2, 2012 i have for sale a 4mil vitos long rod crank that has a rod bent. the crank is trued and welded. very nice crank only has bent rod. im firm at 200 shipped. new rods are 90 bucks shipped from ebay so you will still be around the 300 mark area for used crank. just bought me a new crank and do not feel like taking to machine shop to get the bearings pulled to take apart. the crank only has about 10 hrs max on it . the other rod is still in correct working condition so you buy the set and you will have another rod for spare. with the purchase of the crank i will also throw in a brand new tusk racing complete seal kit. pictures can be seen at the link below. it is the first & photos of my album. also the tusk seal kit can be seen as well. thank you http://s1062.photobucket.com/albums/t484/lilm166/ Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted May 2, 2012 Report Share Posted May 2, 2012 DEAL OF THE WEEK HERE!!!! DIDNT KNOW PAPER WEIGHTS HAD DROPPED IN VALUE SO MUCH!! Quote Link to comment Share on other sites More sharing options...
ticktock Posted May 2, 2012 Report Share Posted May 2, 2012 DEAL OF THE WEEK HERE!!!! DIDNT KNOW PAPER WEIGHTS HAD DROPPED IN VALUE SO MUCH!! 200 Crank 100 Rod 50-65 True and weld Labor ___________ Hot rods from any sponsor - 435 haha, and I thought my prices were high! Quote Link to comment Share on other sites More sharing options...
joshuadgallardo Posted May 2, 2012 Author Report Share Posted May 2, 2012 So what would be a reasonable price? Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted May 2, 2012 Report Share Posted May 2, 2012 100 bucks. The crank is already welded. It's not like a stock unwelded that can be easily pressed apart. And if your gonna change one you might as well do both. Might well do the inner bearings to. You can say its low hours all you want but there is no way I can prove it. Quote Link to comment Share on other sites More sharing options...
quadpro26 Posted May 2, 2012 Report Share Posted May 2, 2012 if it was me i would change the rod and relist as a complete crank Quote Link to comment Share on other sites More sharing options...
Infamous039 Posted May 2, 2012 Report Share Posted May 2, 2012 Crank will have to be sent out, inspected,bearings, both rods replaced, as well as Trued & Welded. If its not done right and by a reputable shop, it aint worth the troubles. if it was me i would change the rod and relist as a complete crank Quote Link to comment Share on other sites More sharing options...
nastyracing Posted May 2, 2012 Report Share Posted May 2, 2012 That crank is a boat anchor if you lucky! Quote Link to comment Share on other sites More sharing options...
joshuadgallardo Posted May 2, 2012 Author Report Share Posted May 2, 2012 Thank you guys for the information that i did not know. I didnt know since it is welded you cant just pop bearings off. So my best bet would be ? Quote Link to comment Share on other sites More sharing options...
ticktock Posted May 2, 2012 Report Share Posted May 2, 2012 Call Brandon at Wildcard Racing and ask him if it's worth it. Sorry we all jumped on you about this and we were pretty much dicks. Adam Quote Link to comment Share on other sites More sharing options...
quadpro26 Posted May 4, 2012 Report Share Posted May 4, 2012 If everything else is good on it just change the rod and true and welded Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.