JdmhatchR Posted April 20, 2012 Report Share Posted April 20, 2012 Hi all, Since I'm new I want to ask help on jetting my shee after my rebuild... It's a 06 banshee: Vitos superstock 050 Vforce 3 Aluminium airbox with 2 Unipods (no lid on the airbox) DMC 916 pipes stock carbs I live at 357.6ft above sea level. (Belgium) For example: Before the rebuild I've had the toomeys T5 and a stock airbox with K&N (no lid on airbox) ,and it was jetted perfect on a 250 main. Done by a local shop, plug chop was perfect... Now I want to do it myself, if you could give me directions on the main jet, that would be nice! Greets Quote Link to comment Share on other sites More sharing options...
special06shee Posted April 20, 2012 Report Share Posted April 20, 2012 well just for a starting point id try somewhere between 280-310 on the mains and a 27.5 pilot 1-1/2 out on air srew.. if you said "250" were perfect before, i dont think much will change by just doing a rebuild with vito piston(i could be wrong, not real familuar with the vito pistens) but since you are running a different box and filter setup id start a little high on the mains and adjust accordingly to the plug chop readings! good luck!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.