03DMshee Posted April 8, 2012 Report Share Posted April 8, 2012 (edited) whats going on? ive done some searches but i'm coming up empty...bought a set of vito's super stock pistons and im wondering if anyone has any ideas as to how far to go with the jetting from where i am now...i am not changing anything besides the pistons and a 20 over bore...any help on jetting upgrade would be most apriciated..below is a list of current settings on the bike..vito's said 185 but from what im hearing is their not the best for advice in that department...thanks guys current jetting is... 53 pilot 168 main needle clip in center mods... DMC 916 exhaust 2 into 1 pwk 35 mm GYT-R CDI head shaved .40 foam filter with lid on box VF3 reeds 800-1000 elevation thanks again... Edited April 8, 2012 by 03DMshee Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted April 8, 2012 Report Share Posted April 8, 2012 whats going on? ive done some searches but i'm coming up empty...bought a set of vito's super stock pistons and im wondering if anyone has any ideas as to how far to go with the jetting from where i am now...i am not changing anything besides the pistons and a 20 over bore...any help on jetting upgrade would be most apriciated..below is a list of current settings on the bike..vito's said 185 but from what im hearing is their not the best for advice in that department...thanks guys current jetting is... 53 pilot 168 main needle clip in center mods... DMC 916 exhaust 2 into 1 pwk 35 mm GYT-R CDI head shaved .40 foam filter with lid on box VF3 reeds 800-1000 elevation thanks again... Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted April 8, 2012 Report Share Posted April 8, 2012 you might want to try a 180 in it and do a plug chop from there. 168 might be a little lean. You didn't say what needle size your running....CEL...DEK? Quote Link to comment Share on other sites More sharing options...
03DMshee Posted April 8, 2012 Author Report Share Posted April 8, 2012 Sorry about that...its a DEK needle... Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted April 9, 2012 Report Share Posted April 9, 2012 OK, DEK is a good needle for 2 into 1 set-ups. Try the 180 main for starters and plug chop form there. Quote Link to comment Share on other sites More sharing options...
03DMshee Posted April 9, 2012 Author Report Share Posted April 9, 2012 Thank you that's what ill do.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.