Jump to content

Using to much gas?


Recommended Posts

I know banshees are gas guzzlers dont get me wrong! But im going through 3 gals in a little over an hour? I just got a fuel leak fixed i thought that was the problem but i was wrong still the same fuel consumption. My quad really isnt that hopped up its got fmf pipes and jetted to 220 so nothing all that fancy. I think i should be getting about 2.5 hours out of a tank if im correct. Any ideas anyone? And if it helps at all if i get it warm it doesnt want to idle.

Link to comment
Share on other sites

  • Replies 36
  • Created
  • Last Reply

Top Posters In This Topic

Yeah there's something wrong there, A tank of gas lasts me awhile I don't know the time but I know its more than 2.5 hours, and I have Pwk 28s, 160 psi of compression, toomey t4s, and a kn filter.

 

Im also jetted spot on though

Link to comment
Share on other sites

you have stock carbs correct? if so take that lid off the air box and throw some 280 main jets in. whats your elevation? if its close to 1000ft above sea level. 280s will be perfect with that set up. ( fmf, k&n filter and lid off) i had the same set up before i went 4 mil. it will def make the bike perform alot better since it will be dialed in right. as for the hr tank of gas something might be wrong... do take into consideration that when your wide open throttle all the time these kind of bikes cug the gas. are you sure it was under a hr for a whole tank of gas including reserve?

Link to comment
Share on other sites

Im about 150 ft above sea level. I live in the heart of florida where its 75 during winter and 109 during summer lol! Yes i was ridin back on fumes in a little over an hour and it was trail ridin so it wasnt a constant WOT. So you think i might be small on jetting? It doesnt run bad? It actully runs like a raped date! I just want to know why my shit uses so much damn fuel LOL i wonder if carbs are running to rich maybe?

Link to comment
Share on other sites

lol. ok so you have stock carbs with the tors tops removed. i would go with 270 mains and make sure you take that damn lid off and let her breath! :headbang: this should get you very close if not dead on for jetting. do a plug chop ( where you actually saw the threads off on the plug to get the reading) to get 100% conformation though. it will def be alot better then the 220 thats in there now. you know how to do a plug chop correctly right? search function is your friend

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...