PDLS Posted April 2, 2012 Report Share Posted April 2, 2012 (edited) The wife and I swapped shee's and rode for 5 min. tops. Then this happened to mine........ I haven't a clue as to what happened but the right piston has a few cracks in the skirting and as you can see all that remains of the left piston is the dome thats in the cylinder. Looks like it fixing to get expensive and makes me wish the first thing I did when I bought this in December is tear it down and rebuild it for my satisfaction. We were just cruising at about 30mph when the wife pulled over and said, "your shit is broke" lol . Edited April 2, 2012 by PDLS Quote Link to comment Share on other sites More sharing options...
Jeremy_bell_banshee99 Posted April 2, 2012 Report Share Posted April 2, 2012 Damn she must ride hard! Perfect oppertunity to get yourself a 4mil and some porting! Quote Link to comment Share on other sites More sharing options...
ClayAiken Posted April 2, 2012 Report Share Posted April 2, 2012 Shit thats some carnage right there. Time for a 4mil. Quote Link to comment Share on other sites More sharing options...
PDLS Posted April 2, 2012 Author Report Share Posted April 2, 2012 What I don't get is we were just cruising, don't they run the best before they blow? All I read is 4 mill is the way to go, just have to gather the cash as I got bent over on taxes this year. I'll post a few more pictures when I get home, the wife took some on her phone right when I pulled the cylinders off, chunks of piston, needle bearing and pistons everywhere. Quote Link to comment Share on other sites More sharing options...
ticktock Posted April 2, 2012 Report Share Posted April 2, 2012 I've seen water do that to connecting rods before. If you need I have a stock head for free, I also have a stock crank that is seperating. Free also. The crank seems good , rods are fine just needs pressed back together, trued and welded. You pay for shipping they are yours. Adam Quote Link to comment Share on other sites More sharing options...
Jeremy_bell_banshee99 Posted April 2, 2012 Report Share Posted April 2, 2012 ^^^^^^ one hell of a guy right there! Quote Link to comment Share on other sites More sharing options...
NickisGod Posted April 2, 2012 Report Share Posted April 2, 2012 kind looks like a hydro lock. i say this because the rod is mighty twisted. Quote Link to comment Share on other sites More sharing options...
troyzstang Posted April 2, 2012 Report Share Posted April 2, 2012 I've seen water do that to connecting rods before. If you need I have a stock head for free, I also have a stock crank that is seperating. Free also. The crank seems good , rods are fine just needs pressed back together, trued and welded. You pay for shipping they are yours. Adam Not surprized by Adams generosity. He's a stand up guy and consistently bails my ass out. By the way welcome to BansheeHQ Troy Quote Link to comment Share on other sites More sharing options...
Matt21 Posted April 2, 2012 Report Share Posted April 2, 2012 How old is the motor Quote Link to comment Share on other sites More sharing options...
RiDeTRIKES250R Posted April 3, 2012 Report Share Posted April 3, 2012 bore and a hone and your back in the game... Quote Link to comment Share on other sites More sharing options...
CAJUN BANSHEE Posted April 3, 2012 Report Share Posted April 3, 2012 bore and a hone and your back in the game... Wow, I wouldn't think bore would help that transfer port. But good luck man there's a lot of good Peeps on here, just make sure you return the favors when ya can. Quote Link to comment Share on other sites More sharing options...
Matt21 Posted April 3, 2012 Report Share Posted April 3, 2012 Wow, I wouldn't think bore would help that transfer port. But good luck man there's a lot of good Peeps on here, just make sure you return the favors when ya can. That post was a joke, lol Quote Link to comment Share on other sites More sharing options...
PDLS Posted April 3, 2012 Author Report Share Posted April 3, 2012 Ticktock, I'll gladly take them off your hands and pay what I can plus the shipping. Can't thank you enough!!! Let me know how or where to send the payment. I can't tell you how old it is but the guy I bought it from said he rebuilt it last summer. I'm waiting on my buddy to get me his puller so I can get it the rest of the way apart and split the cases. On the upper hand, it did have a pancake bearing! Quote Link to comment Share on other sites More sharing options...
BUILDER Posted April 3, 2012 Report Share Posted April 3, 2012 That is some ruff stuff right there? Looks like to me the pistons were slapping around in there I would guess that motor had a ton of hours on it. Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted April 3, 2012 Report Share Posted April 3, 2012 Damn she must ride hard! Perfect oppertunity to get yourself a 4mil and some porting! hell yea perfect time. ha id even go 10 mil if you have the funds Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.