Koba Posted March 23, 2012 Report Share Posted March 23, 2012 so when i got my bike it didnt have headlights but still has the factory switch. Idunno if i have wires for it still or not. what should i do about both tail light and head lights? Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted March 23, 2012 Report Share Posted March 23, 2012 Do you want them? Quote Link to comment Share on other sites More sharing options...
FrankieSquid Posted March 23, 2012 Report Share Posted March 23, 2012 What year is your bike? Newer shees came with light/brake light. The bike I have had a regular light but later added the working brake light to it. What you will have to do is see if someone clipped the wires for your headlight/tail light and re route those wires. Whip out the manual and start wire searching, hope there's a chance they just un plugged it. Just look for snipped wires and test with a volt meter to confirm. Good luck so when i got my bike it didnt have headlights but still has the factory switch. Idunno if i have wires for it still or not. what should i do about both tail light and head lights? Quote Link to comment Share on other sites More sharing options...
cline Posted March 23, 2012 Report Share Posted March 23, 2012 (edited) Well if you say that you don't know if you have wires for it or not, and the TORS has been removed this means that someone has obviously been in the wire harness at least unplugging stuff. If it went any further than is up to you to check, because some guys modify their harness to their liking. You never know, if your bike came without head and tail lights, it might be wired to not accept them anymore. You need to ensure that the harness is still set up to run head and tail lights by verifying your harness against the diagram. If so great, if not try the for sale section for a cheap used good one, try one of the site sponsors, or fix the harness yourself to accomidate lights. Ensure that you have a voltage regulator. Then check the for sale section or F.A.S.T. for head and tail lights and you are good to go. In the tech info thread there is banshee electrical FAQ. Heres the link so you have a diagram and the link to FAST. Good luck. http://bansheehq.com/forums/index.php?showtopic=133650 http://www.farmandsandtoys.com/ Edited March 23, 2012 by cline Quote Link to comment Share on other sites More sharing options...
Koba Posted April 2, 2012 Author Report Share Posted April 2, 2012 Do you want them? ya it be nice to have im pretty sure the dunes you need atleast a tail right not positive. But ya id like both because i ride till it gets dark and a little after sometimes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.