bradyray Posted March 22, 2012 Report Share Posted March 22, 2012 I just bought an 87 banshee that has a YPVS rz350 top end on it. Got it home took off the head cause I didn't think it was running right. The right piston has metal melted on top of it. But the bore is perfect....no scores scatches or gouges at all. Smooth as a baby's a**. So I thought sweet ill just get a new piston. I buy a digital micrometer and go to gauge the cylinders and they are different sizes. By 1.25mm! What should I do? One is 64.25 and the other is 65.50. Should i re sleeve the 65.50 jug? If so how much would that run? If it makes a difference I live in Iowa. Quote Link to comment Share on other sites More sharing options...
Coupelx Posted March 22, 2012 Report Share Posted March 22, 2012 I just bought an 87 banshee that has a YPVS rz350 top end on it. Got it home took off the head cause I didn't think it was running right. The right piston has metal melted on top of it. But the bore is perfect....no scores scatches or gouges at all. Smooth as a baby's a**. So I thought sweet ill just get a new piston. I buy a digital micrometer and go to gauge the cylinders and they are different sizes. By 1.25mm! What should I do? One is 64.25 and the other is 65.50. Should i re sleeve the 65.50 jug? If so how much would that run? If it makes a difference I live in Iowa. pull them off and give them to me. Quote Link to comment Share on other sites More sharing options...
bradyray Posted March 22, 2012 Author Report Share Posted March 22, 2012 Yea that would be good for you huh......lol Quote Link to comment Share on other sites More sharing options...
blowit Posted March 22, 2012 Report Share Posted March 22, 2012 Yea that would be good for you huh......lol If your 65.50mm bore is still good, I would recommend boring the other to match and run 65.50mm pistons. No sense in resleeving unless you really have to. Quote Link to comment Share on other sites More sharing options...
volvo63' Posted March 22, 2012 Report Share Posted March 22, 2012 I just bought an 87 banshee that has a YPVS rz350 top end on it. You need to throw up some pics. Quote Link to comment Share on other sites More sharing options...
Nightmare Posted March 22, 2012 Report Share Posted March 22, 2012 can u run those without using the pv's just like non pv cyl's????? i only ask cause i got a ypvs top end also?????????????? Quote Link to comment Share on other sites More sharing options...
bradyray Posted March 22, 2012 Author Report Share Posted March 22, 2012 You can run them either with the pvs locked open or locked closed. Opinions vary on wich way to go I heard closed was better so I'm gonna try that way. And wouldn't it be better to resleeve the one that only has one more overbore left rather than bore the one that is only on its 2nd overbore?? Quote Link to comment Share on other sites More sharing options...
Nightmare Posted March 22, 2012 Report Share Posted March 22, 2012 im with blowit on that one, not unless u have to. Quote Link to comment Share on other sites More sharing options...
Starwriter Posted March 22, 2012 Report Share Posted March 22, 2012 You can run them either with the pvs locked open or locked closed. Opinions vary on wich way to go I heard closed was better so I'm gonna try that way. And wouldn't it be better to resleeve the one that only has one more overbore left rather than bore the one that is only on its 2nd overbore?? There is no "open or closed". It's a rotating spool that raises and lowers the exhaust port height. If you lock it in the lower position, your upper RPM power is going to suffer drastically. If you lock it in the upper position, it will kill your low end power. The following RZ350 parts are necessary to make the power valves work properly. Servo motor Servo controller Stator Flywheel CDI Voltage regulator Battery or battery eliminator Associated wiring If you don't have all this stuff, you would be better off to sell the RZ350 cylinders and buy some Banshee cylinders. Quote Link to comment Share on other sites More sharing options...
mike0chek Posted March 23, 2012 Report Share Posted March 23, 2012 that cant be good for the crank havin different size pistons lol Quote Link to comment Share on other sites More sharing options...
zach45 Posted March 23, 2012 Report Share Posted March 23, 2012 y not... they do it on jet skis alot. Quote Link to comment Share on other sites More sharing options...
mike0chek Posted March 23, 2012 Report Share Posted March 23, 2012 y not... they do it on jet skis alot. i learn something new every day lol Quote Link to comment Share on other sites More sharing options...
2strokenit Posted March 23, 2012 Report Share Posted March 23, 2012 Is there any way of removing the rotating spool from the RZ cylinders so the port timing is fixed, just asking because I also have a RZ engine and looking at my options. Thanks. Quote Link to comment Share on other sites More sharing options...
Coupelx Posted March 23, 2012 Report Share Posted March 23, 2012 I cant say 100% but usually the port layout is such that its designed for when the power valve is completely open and its a compromise in any other position. Quote Link to comment Share on other sites More sharing options...
Starwriter Posted March 24, 2012 Report Share Posted March 24, 2012 Is there any way of removing the rotating spool from the RZ cylinders so the port timing is fixed, just asking because I also have a RZ engine and looking at my options. Thanks. If you removed the spool, there would be a very large chunk of the port missing. As Coupe mentioned, when the spool is in the up position, everything is one with the universe. When the spool is rotated down, the port is kinda funky, but it makes the motor think the top of the exhaust port is lower, to improve low rpm power. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.