sootman73 Posted March 19, 2012 Report Share Posted March 19, 2012 Last question I have about tuning is about the air/fuel screws. I have them turned out 1.5 turns. How can I determine that I have them set right? Quote Link to comment Share on other sites More sharing options...
Surfrjag Posted March 19, 2012 Report Share Posted March 19, 2012 If they are set the same. It revs off idle clean and doesnt hang before coming back to idle you should be good Quote Link to comment Share on other sites More sharing options...
rdzbangshee Posted March 19, 2012 Report Share Posted March 19, 2012 if you turn the air screw 1/8 turn and it changes the idle you have the right idle jet , 1 and a half turn out is perfect . \\\ Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted March 19, 2012 Report Share Posted March 19, 2012 All motors will be different. Saying 1.5 turns out is perfect is a general blanket statement. That said, once your main and pilot are set you should be able to set the air screw. Start with it .5 turn out and stab the throttle. You want the bike to rev out clean. Keep adjusting until it does. Most bikes will end up between .5 and 2.5 turns out. Quote Link to comment Share on other sites More sharing options...
sootman73 Posted March 19, 2012 Author Report Share Posted March 19, 2012 Okay I will do that then, Thanks for the input! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.