LawDog Posted March 13, 2012 Report Share Posted March 13, 2012 So this is my first Shee and i traded it my 05 Honda Rancher 4x4 for this 03 Shee. It has what i can see on the motor is vf3 reeds, cool heads, and T5's other than that i dont know what domes it has if its been ported, or bored. My issue is yesterday my buddy and i noticed it has some noise coming from the bottom end and when u give it throttle or at idle it has a vibration. Me and my buddy are both like ride it tell it dies but money is tight and wondering if it would be better to tear in to the motor and see what it could be that way if its a bearing or something i could fix it before i have to do a total rebuild which is going to run 5 to 6 bills. But its riding season and all i want to do is ride. So in short Q#1 any ideas what the noise and vibration could be? Q#2 should i just rip in to it and see what it is or ride tell it dies? Q#3 what would be the best rebuild kit be to get as of what is out right now? Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted March 13, 2012 Report Share Posted March 13, 2012 Crank..... tear it apart. Parts are everywhere reasonably cheap, and will be to you within a week. If your proactive you can tear down, repair, rebuild in about 1 week without paying extra shipping. Faster if you wanna pay for UPS's gas bill. Quote Link to comment Share on other sites More sharing options...
Josh Z Posted March 13, 2012 Report Share Posted March 13, 2012 crank is twisting or possibly other issues.. tear it apart... better to be safe than sorry.... Quote Link to comment Share on other sites More sharing options...
toytech Posted March 14, 2012 Report Share Posted March 14, 2012 what they said, fix it before it desroys more. Quote Link to comment Share on other sites More sharing options...
LawDog Posted March 14, 2012 Author Report Share Posted March 14, 2012 Crank..... tear it apart. Parts are everywhere reasonably cheap, and will be to you within a week. If your proactive you can tear down, repair, rebuild in about 1 week without paying extra shipping. Faster if you wanna pay for UPS's gas bill. What would be a list of items i would need to do the job and what crank should i get? Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted March 14, 2012 Report Share Posted March 14, 2012 A clymers manual a set of wrenches, sockets,a flywheel puller, a clutch holder, I have allen bolts on mine. And a area to lay your stuff out. When you split the cases you'll probably say "damn that was easy" Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted March 14, 2012 Report Share Posted March 14, 2012 I suggest doing a leakdown and compression test before you tear it apart. For shits and giggles check your flywheel before anything else, might save lots of work. If compression is good, may or may not want to throw rings in it. Consider complete seal kit instead of just crank seals, only few$$ more, and you got it apart. Complete gasket kit. Check with site sponsers for crank and such. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.