Gitzen Posted March 3, 2012 Report Share Posted March 3, 2012 I bought a 95 banshee, it has no key on it and also the tors is removed. There are two sets of wires nutted together and I just wanna make sure they are wired correctly. First one is for the kill switch a black wire and a black/white wire together, is this correct for the kill switch to operate? Also there is a red wire and a brown wire nutted together which I believe would be for the key switch? Do these wires nutted together sound correct or are they messed up. Thanks. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted March 3, 2012 Report Share Posted March 3, 2012 Does the bike run? Quote Link to comment Share on other sites More sharing options...
Gitzen Posted March 3, 2012 Author Report Share Posted March 3, 2012 No isn't getting spark and everything has tested good with my meter Quote Link to comment Share on other sites More sharing options...
tedd1 Posted March 3, 2012 Report Share Posted March 3, 2012 Take the wire nut off the B and B/W. Grounding the B/W will shut the motor off. Put it on the B/W and B/R where the key used to be. This should get power to the CDI. The R and Br do not matter as they are connected to anything but the plug. Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted March 4, 2012 Report Share Posted March 4, 2012 Take the wire nut off the B and B/W. Grounding the B/W will shut the motor off. Put it on the B/W and B/R where the key used to be. This should get power to the CDI. The B/W and B/R wires are on the switch side of the connector. On the bike side of the connector they are Black and Red/Black!!!!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
tedd1 Posted March 4, 2012 Report Share Posted March 4, 2012 ...there is a red wire and a brown wire nutted together... The B/W and B/R wires are on the switch side of the connector. On the bike side of the connector they are Black and Red/Black!!!!!!!!!!!!!! The only brown wire on a banshee is on the switch side of the connector. The OP's statement led me to believe that he was working on the switch side!!!!!!!!!!!!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted March 4, 2012 Report Share Posted March 4, 2012 The only brown wire on a banshee is on the switch side of the connector. The OP's statement led me to believe that he was working on the switch side!!!!!!!!!!!!!!!!!!!!!! The only reason to do it that way is so you can just plug a switch back in later!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted March 4, 2012 Report Share Posted March 4, 2012 Loud noises!!!!!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.