CruelSoul Posted March 3, 2012 Report Share Posted March 3, 2012 Just got a seal that goes behind the front sprocket and was wondering if this is a hard thing to change. Quote Link to comment Share on other sites More sharing options...
Coupelx Posted March 3, 2012 Report Share Posted March 3, 2012 Just got a seal that goes behind the front sprocket and was wondering if this is a hard thing to change. pull the sprocket and the sleeve behind it that the seal rides on. pop seal out. reassemble in reverse order. Quote Link to comment Share on other sites More sharing options...
CruelSoul Posted March 3, 2012 Author Report Share Posted March 3, 2012 Flat headed screwdriver to pull out correct, and then maybe a socket and a mallet to reinstall? Quote Link to comment Share on other sites More sharing options...
Coupelx Posted March 3, 2012 Report Share Posted March 3, 2012 yep. a bit a sealer doesnt hurt to lubricate and seal it. Quote Link to comment Share on other sites More sharing options...
CruelSoul Posted March 3, 2012 Author Report Share Posted March 3, 2012 Yeah I figured a little bit of grease too wonder how long it has been bad doesn't leak out until I took out that spacer behind the front srpocket lol Quote Link to comment Share on other sites More sharing options...
Jrod324 Posted October 26, 2013 Report Share Posted October 26, 2013 Hey guys is this the part needed to change when you have a transmission leak on the right lower side of the bike? Quote Link to comment Share on other sites More sharing options...
Starwriter Posted October 26, 2013 Report Share Posted October 26, 2013 Hey guys is this the part needed to change when you have a transmission leak on the right lower side of the bike? No, the sprocket is on the left side of the motor. If you have a leak on the right side, it's either the clutch cover gasket or cracked cases. Clean it well, run it a bit and look for where it's coming from. Quote Link to comment Share on other sites More sharing options...
Finch Posted October 26, 2013 Report Share Posted October 26, 2013 No, the sprocket is on the left side of the motor. If you have a leak on the right side, it's either the clutch cover gasket or cracked cases. Clean it well, run it a bit and look for where it's coming from. what about kickstarter seal? Quote Link to comment Share on other sites More sharing options...
Starwriter Posted October 26, 2013 Report Share Posted October 26, 2013 what about kickstarter seal? I thought of that, but if the OP can't see oil running all the way down the side of the clutch cover, he needs to sell it and buy a skatebord so he can go play haky sack with his buddies. Quote Link to comment Share on other sites More sharing options...
Jrod324 Posted October 27, 2013 Report Share Posted October 27, 2013 No, the sprocket is on the left side of the motor. If you have a leak on the right side, it's either the clutch cover gasket or cracked cases. Clean it well, run it a bit and look for where it's coming from. I rode it today and it looks like its leaking from the right lower side through the gasket and from the water pump on the clutch cover but it only leaks alot when riding/hot... You think a new gasket will fix the leak or its not that simple?? And what cases are were you talking about? Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted October 27, 2013 Report Share Posted October 27, 2013 oh boy.....the "cases" that he is talking about are the engine cases......as in these are built in 2 piece engine blocks and then sealed between them and bolted together. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.