007banshee Posted February 29, 2012 Report Share Posted February 29, 2012 Hey guys got a modded star and shaft cases are sealed already and i cant seem to get the star to budge. Any tricks suggestions? Nick Quote Link to comment Share on other sites More sharing options...
NickisGod Posted February 29, 2012 Report Share Posted February 29, 2012 without being there and knowledge of the install none of us will be able to help you. my suggestion is to take it apart and inspect your work. a tip for the future dont fully reassemble stuff untill you tested it. im assuming it has something to do with the spring. try pulling your shift shaft towards you, maybe your selector isnt touching the star pins. Quote Link to comment Share on other sites More sharing options...
themechanic Posted February 29, 2012 Report Share Posted February 29, 2012 yup , take it apart a fork is out of place Quote Link to comment Share on other sites More sharing options...
007banshee Posted February 29, 2012 Author Report Share Posted February 29, 2012 No no no guys lol i decided i want to put a modded star on. Im in the process of a full rebuild. Brand new drum forks rods. Bottom end is assembled just trying to get the star.off to put the new one on. Nick Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted February 29, 2012 Report Share Posted February 29, 2012 No no no guys lol i decided i want to put a modded star on. Im in the process of a full rebuild. Brand new drum forks rods. Bottom end is assembled just trying to get the star.off to put the new one on. Nick this > http://www.amazon.com/dp/B0002NYDRG/ref=asc_df_B0002NYDRG1918297?smid=ATVPDKIKX0DER&tag=hyprod-20&linkCode=asn&creative=395093&creativeASIN=B0002NYDRG Quote Link to comment Share on other sites More sharing options...
willaduncan Posted February 29, 2012 Report Share Posted February 29, 2012 take the screw out and pull the bitch off its tight but it will come off Quote Link to comment Share on other sites More sharing options...
007banshee Posted March 1, 2012 Author Report Share Posted March 1, 2012 Yeah i've been tryin with vice grips, prying,there's some green gunk on it loctite? Quote Link to comment Share on other sites More sharing options...
007banshee Posted March 1, 2012 Author Report Share Posted March 1, 2012 Bearing puller got it thanks. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted March 1, 2012 Report Share Posted March 1, 2012 Jesus, I've had a LOT of banshees over the years and built quite a few engines, and I've never had a shift star that didn't just fall off in my hand when I removed the screw. Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted March 1, 2012 Report Share Posted March 1, 2012 mine has always been super loose too jared......never a problem. but the last set of cases i opened up i really had to work to get the damn shift star off the shaft......kinda threw me for a loop. i usually just use a flat head and wiggle it in carefully behind it and they pop.....this last one took a little more finesse though. Quote Link to comment Share on other sites More sharing options...
007banshee Posted March 1, 2012 Author Report Share Posted March 1, 2012 Yeah I was thinking it would pop off also......it was brand new and had some hard green residue around the inside edge of it and on the whole backside? Used quite a bit of crankin on the puller and it literally popped off...... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.