chetgoff Posted February 8, 2012 Report Share Posted February 8, 2012 hey guys went out to break in new motor and clutch was acting weird. I installed a new clutch for this build aswell. When I first took off all was good for about 10 minutes, then my clutch lever went limp. I was gonna limp it home when all of a sudden the clutch was back. this happened several times on the way back. Just curious if anybody has had this problem before. thanks for any help Quote Link to comment Share on other sites More sharing options...
RadarRacing Posted February 8, 2012 Report Share Posted February 8, 2012 If your clutch basket was grooved up it may do stuff like that. Otherwise just take it apart and see why the plates or washer, nut are messing up before it does damage to other stuff. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted February 9, 2012 Report Share Posted February 9, 2012 That happened to be when the adjustment screw started to back out Quote Link to comment Share on other sites More sharing options...
chetgoff Posted February 9, 2012 Author Report Share Posted February 9, 2012 the nut and washer had came off of the pusher. Glad it did not mess anything up. Not sure if it was a good idea or not but I put locktight on it this time. What do you all torque that nut to? I could not find it n the manual so I read online and someone said like 6 ft lbs. Thats what i torqued it to this time hope I'm right. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.