jtbhq420 Posted January 23, 2012 Report Share Posted January 23, 2012 Just picked up 144 inch and a quarter sled studs for the shee. I have a bald set of 20x11 6 ply razors and a set of 19x10 4 ply hole shots for rears. For fronts I have a set of stock bald Honda fronts that are more of a rounded tire they are 22x7x10 or a set of squared fast Trekkers that are 21s. For the rears I'm not sure which size would be better smaller or bigger I'd like to hit the circle track a little bit but more looking for straight line traction out on the ice. My other thought was if a v pattern would be better or more of a straight line pattern would be better to allow some side sliding allowance. My other thought/question for the fronts was to either go with a single line down the middle on the round tire or a staggered pattern on the square ones. I was thinking line 40-50 in each rear and 20-25 in each front, or would I be better of just getting regular screw in sheet metal screw style studs for the fronts Any answers are appreciated thanks guys Quote Link to comment Share on other sites More sharing options...
Nieskes Posted January 23, 2012 Report Share Posted January 23, 2012 Sled studs are going to suck on a oval, and are "ok" for drag. I run 70 per tire on mine and spin off the line for a little while. I would suggest getting sled chisels instead of regular studs. I would also suggest running one inch kold kutter studs up front. You kinda gotta choose what type of riding your gunna do, I would do two different sets for drag and playing on the tracks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.