greasergroff Posted January 22, 2012 Report Share Posted January 22, 2012 just wondering if any one uses FTZ oof pipes.would really like to hear some responces on performance and possibly see some pictures.i would really like to get coned pipes out the left like ftz or possibly wickedmotorsports?any info would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted January 23, 2012 Report Share Posted January 23, 2012 ftz is junk, wicked motorsports is no better. get some shearer custom pipes Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted January 23, 2012 Report Share Posted January 23, 2012 ftz is junk, wicked motorsports is no better. get some shearer custom pipes So you personally have used them? Quote Link to comment Share on other sites More sharing options...
njbanshee Posted January 23, 2012 Report Share Posted January 23, 2012 Go with shear or CPI Quote Link to comment Share on other sites More sharing options...
SlowerThanYou Posted January 23, 2012 Report Share Posted January 23, 2012 just wondering if any one uses FTZ oof pipes.would really like to hear some responces on performance and possibly see some pictures.i would really like to get coned pipes out the left like ftz or possibly wickedmotorsports?any info would be greatly appreciated. What information aree you looking for on the Wicked Motorsports pipes. We run the big bore oof on the asphalt, hill & 300'. Quote Link to comment Share on other sites More sharing options...
greasergroff Posted January 23, 2012 Author Report Share Posted January 23, 2012 so why exactly are the FTZ not good cuz from what i hear the shears have problems staying together at welds and cpi and shear are not coned.i like the look of those wickedmotorsports but looking for stingers no mufflers.are they holding up ok for you so far like no cracks in welds or anything? Quote Link to comment Share on other sites More sharing options...
camatv Posted January 25, 2012 Report Share Posted January 25, 2012 throw up some graphs banshee HP~! hand coned raw gas welded pipes are extra pimp.. Quote Link to comment Share on other sites More sharing options...
SlowerThanYou Posted January 28, 2012 Report Share Posted January 28, 2012 so why exactly are the FTZ not good cuz from what i hear the shears have problems staying together at welds and cpi and shear are not coned.i like the look of those wickedmotorsports but looking for stingers no mufflers.are they holding up ok for you so far like no cracks in welds or anything? They cracked at the mounts on the pipes, but we had them hard mounted. We reinforced the area around the cracks & have had no problems since. Just for info, they should be run with a rubber dampner at the foot peg. Quote Link to comment Share on other sites More sharing options...
greasergroff Posted January 29, 2012 Author Report Share Posted January 29, 2012 ok cool thanks for the heads up.i planned on ordering them without any mounts on them because i machined my own pegs that are back about 4 inches from stock location.i would just make and weld on my own mounts that are rubber mounted.also if any one is intrested i just got my custom clear water pump covers from my buddy with a water jet machine,made from 1/4'' polycarbonate.pretty cool looking and look sweet with clear clutch cover.in the testing process now to see how good they will hold up but its a nice pice of mind to actually see my pump spinning so i know the plastic gear is not broken or stripped. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.