madbanshee Posted January 19, 2012 Report Share Posted January 19, 2012 hi guys, i need to replace the bushings on these arms, stock replacement bushings look like they will not fit these arms so i need to determine what brand these arms are. Thanks in advance. sorry if photos are too large Quote Link to comment Share on other sites More sharing options...
Azryll Posted January 19, 2012 Report Share Posted January 19, 2012 Look like stockers to me Quote Link to comment Share on other sites More sharing options...
NYUK Posted January 19, 2012 Report Share Posted January 19, 2012 dem r stockers. Quote Link to comment Share on other sites More sharing options...
madbanshee Posted January 19, 2012 Author Report Share Posted January 19, 2012 (edited) i must be confused, the bushes look like they wont slide onto the shaft/pin. the bushes i took off dont look like the standard bushings ( see photo below) the pin is the full length of the arm which no room for the bushes to slide in. correct me if im wrong. are these the bushes im meant to be buying? http://www.ebay.com.au/itm/NEW-A-arm-Control-arm-bushing-set-Yamaha-Banshee-350-YFZ350-1987-2006-/390358542337?pt=Motors_ATV_Parts_Accessories&hash=item5ae32ea801 I've pushed the pin in so u can see there is no room/gap for the bushes. Edited January 19, 2012 by madbanshee Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted January 19, 2012 Report Share Posted January 19, 2012 That pic ^^^ shows arm with bushing still in arm. That chunk of shit you show in other pic might be the seal out of dust caps. Quote Link to comment Share on other sites More sharing options...
madbanshee Posted January 20, 2012 Author Report Share Posted January 20, 2012 That pic ^^^ shows arm with bushing still in arm. That chunk of shit you show in other pic might be the seal out of dust caps. i had another look today when i got the chance, and yes you are right. they just blended in with the metal that i did not notice them. they are really hard and thought the bushings were metal. thanks guys. which bushings should i be looking at? can you guys make recommendations of which ones i should be buying off ebay? Quote Link to comment Share on other sites More sharing options...
madbanshee Posted January 20, 2012 Author Report Share Posted January 20, 2012 also, where can i find dust seals? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.