akelly000 Posted January 14, 2012 Report Share Posted January 14, 2012 K guys I need help. My shee has a knocking noise in my motor. It starts fine idles fine. It doesn't have a chain on it right now cause I'm waiting on my ext chain, could this be some of the problem? Compression is good across cylindeers. Pistons look as they should. Any ideas?? Quote Link to comment Share on other sites More sharing options...
JpRedline Posted January 14, 2012 Report Share Posted January 14, 2012 It Could be the sprocket shaking because its loose or theres no chain! Haha! I wish for you its only that... If not its not good looking! Quote Link to comment Share on other sites More sharing options...
1bad4millbanshee Posted February 20, 2012 Report Share Posted February 20, 2012 Wrist pins or crank beatings getting piston slap Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted March 1, 2012 Report Share Posted March 1, 2012 Where is it coming from? If it is coming from the clutch cover area, you probably had the clip come off the kick idler gear and get ran through the primary drive gears. Pull the clutch cover and see if the clip is missing, if it is pull the clutch basket and inspect EVERY tooth on the basket and crank gears for damage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.