RadarRacing Posted January 11, 2012 Report Share Posted January 11, 2012 My Shaw is just a little short for my new frame /swingarm. If anyone has a shaw setup for a no link and hopefully valved for a +10 or 12 thats 13 1/2 or close I would trade my 12 1/2" . Mine is nice with very low ride time and setup for a 200lb rider and a +10. Thank you. Quote Link to comment Share on other sites More sharing options...
lesnant Posted January 11, 2012 Report Share Posted January 11, 2012 (edited) Do you know what your shaw is charged at? I need a 12.5 and i have a 13.5. Mine is charged at 700psi and used on a +10. You have any pic of your bike with the 12.5 on the back? PM me for more info. Edited January 11, 2012 by lesnant Quote Link to comment Share on other sites More sharing options...
RadarRacing Posted January 11, 2012 Author Report Share Posted January 11, 2012 Theres a pic in this thread. Thats a +10 lonestar no link. It was actually setup about 12 3/4 right there. http://bansheehq.com/forums/index.php?showtopic=150151 Quote Link to comment Share on other sites More sharing options...
quadpro26 Posted January 11, 2012 Report Share Posted January 11, 2012 You know you can lengthen them out right? There is a spacer inside. So take it apart, catch all the oil (discharge the nitrogen first of coarse). Take the spacer, cut an inch off it and put it together. Recharge it and there you go Quote Link to comment Share on other sites More sharing options...
RadarRacing Posted January 18, 2012 Author Report Share Posted January 18, 2012 I got it done thanks. Quote Link to comment Share on other sites More sharing options...
quadpro26 Posted January 19, 2012 Report Share Posted January 19, 2012 no problem Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.