10milmike Posted January 9, 2012 Report Share Posted January 9, 2012 Hey guys, here is my Question. Trinity does not have the rights to the Cheetah anymore, so were can I get a 73MM Piston at a good price? I know what Harry was paying for the pistons 80 Bucks each, and selling for 190 each Haha Fuck u . I tryed to look them up on Wisco web site but could not find them. The part number is 10018M07300, any help would be great. Thanks. Quote Link to comment Share on other sites More sharing options...
badassbanshee479 Posted January 9, 2012 Report Share Posted January 9, 2012 jeff at fast racing tracked down a set of 72mm super cub pistons for me when I needed a set last winter.... maybe hit him up and see if he can find ya what your looking for Quote Link to comment Share on other sites More sharing options...
10milmike Posted January 9, 2012 Author Report Share Posted January 9, 2012 (edited) 72mm ? I found tons of those but no 73MM. Edited January 9, 2012 by 10milmike Quote Link to comment Share on other sites More sharing options...
VR350 Posted January 9, 2012 Report Share Posted January 9, 2012 72mm ? I found tons of those but no 73MM. I think you'll find that even a lot of builders call trinity when looking for pistons. 80 bucks seems a little on the low side since dealers can't even buy 65mm wiseco that cheap anymore Quote Link to comment Share on other sites More sharing options...
lms1977 Posted January 9, 2012 Report Share Posted January 9, 2012 call east coast atv if you need the # let me know I do machining for him trinity machines the windows in them it think, you can get a blank piston and put the windows in them as well I do that for east coast atv tell him Mike sent you Quote Link to comment Share on other sites More sharing options...
10milmike Posted January 9, 2012 Author Report Share Posted January 9, 2012 I think you'll find that even a lot of builders call trinity when looking for pistons. 80 bucks seems a little on the low side since dealers can't even buy 65mm wiseco that cheap anymore Trinity does not have the rights to the cheetah anymore, and yes Harry did pay 80 a piston, trust me, and he sold them for 190. I know the inside over there. But I refuse to buy shit from him not that my boy left there. Quote Link to comment Share on other sites More sharing options...
tedd1 Posted January 9, 2012 Report Share Posted January 9, 2012 Piston Kit See if this will help... Quote Link to comment Share on other sites More sharing options...
10milmike Posted January 9, 2012 Author Report Share Posted January 9, 2012 (edited) Piston Kit See if this will help... Thanks Tedd but partsdepotatv is trinity, just there ebay name... And Mike yea I am going to call east coast Atv. Thanks. Edited January 9, 2012 by 10milmike Quote Link to comment Share on other sites More sharing options...
camatv Posted January 11, 2012 Report Share Posted January 11, 2012 its an kawasaki H2 piston if the crank is a 115 rod. then you would need to machine the windows in them IF you want to. they dont have to have the windows... also check out wossner pistons for the h2. about the better retail price i have seen is about 125 bucks.. harry probably got them for that low price because they bot a shit ton of them. the h2's i believe are a 423m07300 i have a set on the shelf out there. adn i'm with you on the retarded price 400 bucks for a set of pistons and a few o-rings ( 2 of which are WRONG) and some 250r intake gaskets from cometic yea right Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted January 11, 2012 Report Share Posted January 11, 2012 the wossner pistons are a single ring design, right? Quote Link to comment Share on other sites More sharing options...
camatv Posted January 11, 2012 Report Share Posted January 11, 2012 hmm no i believe they are 2 ring. http://www.ebay.com/itm/Piston-Kits-Kawasaki-H2-750-Wossner-NEW-/110794221152?hash=item19cbd9a660&item=110794221152&pt=Motorcycles_Parts_Accessories&vxp=mtr#ht_1813wt_1139 only thing i am concernd about is the side cut at the pin. might be to long. Quote Link to comment Share on other sites More sharing options...
10milmike Posted January 11, 2012 Author Report Share Posted January 11, 2012 Thanks cam, if does look long in that pic, some else told me that they use KTM pistons in there 535, not sure what piston, I am going to ask them again tomorrow. And yes, I have have 115 rods, so were do I get the windows cut, A machine shop? I do not have a machine in my garage, Wish did. Quote Link to comment Share on other sites More sharing options...
tortuga Posted January 27, 2012 Report Share Posted January 27, 2012 (edited) Thanks cam, if does look long in that pic, some else told me that they use KTM pistons in there 535, not sure what piston, I am going to ask them again tomorrow. And yes, I have have 115 rods, so were do I get the windows cut, A machine shop? I do not have a machine in my garage, Wish did. Hi,did u ever found out about the ktm piston info. Thanks Edited January 27, 2012 by tortuga Quote Link to comment Share on other sites More sharing options...
10milmike Posted January 30, 2012 Author Report Share Posted January 30, 2012 No not yet, I will find out sometime this week. Quote Link to comment Share on other sites More sharing options...
camatv Posted January 30, 2012 Report Share Posted January 30, 2012 my 535 has no windows in it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.