CruelSoul Posted January 6, 2012 Report Share Posted January 6, 2012 Well just got everything together on my banshee but shes idling really high which way do I need to turn the screws on the top of the gay boxes on the carb to go up and down but another thing I have noticed is the one carb when you turn it all the way one way it gets tight faster then the other Quote Link to comment Share on other sites More sharing options...
CruelSoul Posted January 7, 2012 Author Report Share Posted January 7, 2012 Also how many kicks does it usually take to start a banshee just wondering mine takes around 2-4 kicks with this colder weather does this sound about right? Quote Link to comment Share on other sites More sharing options...
Rustynail Posted January 7, 2012 Report Share Posted January 7, 2012 The First thing you need to do is either buy the T.O.R.S. Elimination kit or buy a set of stock carbs that have already had the idle screw installed...they are a dime a dozen anymore. And 2-4 kicks in colder weather isnt bad...if you have to kick it 5 or more jetting is probably off. Quote Link to comment Share on other sites More sharing options...
CruelSoul Posted January 7, 2012 Author Report Share Posted January 7, 2012 I have a tors kit but it didin't come with the idle screws and I wanna ride but don't know where to start not sure whcih way I should turn my top screws for high and low idleing Quote Link to comment Share on other sites More sharing options...
CruelSoul Posted January 7, 2012 Author Report Share Posted January 7, 2012 Anyone its just so damn high and no air leaks already checked after rebuild Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.