CAJUN BANSHEE Posted January 5, 2012 Report Share Posted January 5, 2012 Was up yall, got a question for the honest peeps here. I'm trying to sell one of my old setups I was hanging on to but now I'm going to a 421 cub and need funds. It really doesn't matter if I sell it here, just want to know what its worth. It is a stock cylinder 4mill, full drag port by someone yall don't know but is a reputable builder in my area and was very impressive. Cylinder bore is at .050 and accept a 110 rod crank. They call this the short rod 4mill. I broke a piston skirt at idle but no damage to walls were made except for one very small nick on one of the intake ports. The reason for the failed piston was the need to go up one bore size because of natural wear, yes I rode the shit out of her, but always kept up maintenance. I have 34pjs, one piece intake and crank that I ran with it, which I will include. The crank needs new bearings though. What yall think on the high and low side. Thanks for any replies. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted January 5, 2012 Report Share Posted January 5, 2012 500 for everything. Maybe less. Maybe more. A shit load on eBay. Quote Link to comment Share on other sites More sharing options...
CAJUN BANSHEE Posted January 5, 2012 Author Report Share Posted January 5, 2012 That's what I was thinking minus carbs. Thanks, I might try eBay and hope it bids up a little more. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.