banshee15 Posted January 4, 2012 Author Report Share Posted January 4, 2012 tbh with you guys i didnt do it i bought a banshee off a guy that needs re done an thats one thing he pointed out to me the hole that needs plug is a lil bigger than the 6mm .75 pitch tap Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted January 4, 2012 Report Share Posted January 4, 2012 Like I said, find a short bolt that fits. Wrap Teflon around it, screw it in. Is you want cut off the head dab JB weld on it. You can sand that pretty smooth to. Quote Link to comment Share on other sites More sharing options...
jsn210 Posted January 4, 2012 Report Share Posted January 4, 2012 Or just get a new carb and start over. I'm sure several people have an extra stock carb or two laying around they would get rid of. Quote Link to comment Share on other sites More sharing options...
banshee15 Posted January 4, 2012 Author Report Share Posted January 4, 2012 heres wat i am asking does the botl/tap have to be a fine thread or can it be anything the reason i asking is because someone told me it has got to be a fine thread to plug the whole Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted January 4, 2012 Report Share Posted January 4, 2012 Doesn't matter. "fine" will be easier to tap and you have more TPI. But the kit comes with a tap. Use that if you can. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.