miami350 Posted December 30, 2011 Report Share Posted December 30, 2011 im looking for some fully drag ported cylinder for my stock crank bike ..... will be good if it a whole setup wit piston and head if not just cylinder would be fine LET ME KNOW Quote Link to comment Share on other sites More sharing options...
DwnSouth Posted December 30, 2011 Report Share Posted December 30, 2011 im looking for some fully drag ported cylinder for my stock crank bike ..... will be good if it a whole setup wit piston and head if not just cylinder would be fine LET ME KNOW I got some HJR jugs, pistons, with fresh bore. Pump gas, and race gas domes. Bike went 4.45 last time out. Pistons were 200, jugs were 250+300 for drag port, two sets of domes were 150. Real strong runner 650 for everything but crank. Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted December 30, 2011 Report Share Posted December 30, 2011 Get ahold of Edavis on here.... he had a set of cyls for sale that ran hard. Quote Link to comment Share on other sites More sharing options...
miami350 Posted January 6, 2012 Author Report Share Posted January 6, 2012 still lookin for some !!! Quote Link to comment Share on other sites More sharing options...
eric b Posted January 7, 2012 Report Share Posted January 7, 2012 I have a set 64.5 bore. With pistons and stock head shaved for 165 psi. 47 thousands squish. Motor went 6.7 @ 96 in the 1/8 on akly. Runs strong. 600 shipped. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.