johnson2011 Posted December 28, 2011 Report Share Posted December 28, 2011 so i was going through my moose rebuild carb kits that i got last year, and was looking at a these small jets that i believe they are the main air jets but they say 160 and there suppose to say 1.6 im just wondering does moose just do this as like a different sizing increments or just are they miss prints or what help please. Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted December 29, 2011 Report Share Posted December 29, 2011 What kind of carb is it supposed to be for? Maybe pics? Quote Link to comment Share on other sites More sharing options...
ginger Posted December 29, 2011 Report Share Posted December 29, 2011 larry is right, we need to know, stock carbs? what type of carbs do you have? Quote Link to comment Share on other sites More sharing options...
johnson2011 Posted January 4, 2012 Author Report Share Posted January 4, 2012 larry is right, we need to know, stock carbs? what type of carbs do you have? yea sorry guys stock carbs Quote Link to comment Share on other sites More sharing options...
ginger Posted January 4, 2012 Report Share Posted January 4, 2012 im not sure what they would be for, pilot jets are normally 25-27.5 and mains should be larger around 260-340+ Quote Link to comment Share on other sites More sharing options...
Bkm2006 Posted January 4, 2012 Report Share Posted January 4, 2012 There is an airjet its real small i think stock is 2.6. I could be wrong as i havent looked at it in awhile Quote Link to comment Share on other sites More sharing options...
fiveohfanatic Posted January 17, 2012 Report Share Posted January 17, 2012 They are the airjets, just installed these kits on my banshee. Look at the inlet side of your carb at the base of the opening, its there. Quote Link to comment Share on other sites More sharing options...
Coupelx Posted January 17, 2012 Report Share Posted January 17, 2012 They are the airjets, just installed these kits on my banshee. Look at the inlet side of your carb at the base of the opening, its there. This guy has it. Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted April 25, 2012 Report Share Posted April 25, 2012 I know this is old, but I've got to ask. My engine builder is telling me to remove the Toomey Needles and run the stock needles in the middle groove on my otherwise stock motor except for pods and T5's. I only have the needles that came in the Moose Racing Carb Rebuild Kit. What are you thoughts on these needles? Are they just as good as stock? Also, the previous owner really tore up the drain screws, are there a set in the Rebuild Kit? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
zach45 Posted April 25, 2012 Report Share Posted April 25, 2012 Post here. Someone will have stock needles laying around... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.