madbanshee Posted December 22, 2011 Report Share Posted December 22, 2011 Hi guys, I've pull my water pump apart to find that the plastic impeller is rubbing on the metal plate cover. See picture Should I be replacing this with a new one or is this normal? First time pulling it apart so in not sure if it's ok or not. Thanks Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted December 22, 2011 Report Share Posted December 22, 2011 No that's not. It's only hitting on that one side so it's not straight. Get a after market one.I have the pro design, no complaints as of yet. Quote Link to comment Share on other sites More sharing options...
rdzbangshee Posted December 22, 2011 Report Share Posted December 22, 2011 go with a aluminum one i exploded two stock ones . I run a mull gear to ill never go back to stock junk. Quote Link to comment Share on other sites More sharing options...
06specialedition Posted December 22, 2011 Report Share Posted December 22, 2011 Chariot is the way to go. I run the ultra high flow full kit. Here is some options for ya: http://motors.shop.ebay.com/i.html?_from=R40&_trksid=p3841.m570.l1313&_nkw=Chariot+banshee+impeller&_sacat= Quote Link to comment Share on other sites More sharing options...
mookie Posted December 22, 2011 Report Share Posted December 22, 2011 X2 on chariot Quote Link to comment Share on other sites More sharing options...
joecrossman69 Posted December 22, 2011 Report Share Posted December 22, 2011 hello what do you think for Ultra High flow i like this impeller but it's good for my engine temperature ? I've a big capacity radiator thanks for your answer joe Quote Link to comment Share on other sites More sharing options...
Coupelx Posted December 22, 2011 Report Share Posted December 22, 2011 there isnt anything that keeps it perfectly centered. it kinda floats in there, some rubbing will happen. replace with new stock and enjoy. theres a reason why its plastic. Quote Link to comment Share on other sites More sharing options...
madbanshee Posted December 23, 2011 Author Report Share Posted December 23, 2011 Chariot is the way to go. I run the ultra high flow full kit. Here is some options for ya: http://motors.shop.ebay.com/i.html?_from=R40&_trksid=p3841.m570.l1313&_nkw=Chariot+banshee+impeller&_sacat= I'm thinking of getting the chariot standard impeller. Bike isn't highly modified. Fmf's, jets, k&n filter, carbon reeds. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.