04zSpittinKlotz Posted December 11, 2011 Report Share Posted December 11, 2011 hey guys this is my first post but ive been reading around for a few months since i got my first shee, everyone here seems pretty cool and knows their stuff. my question is, i took the fox floats off my blue shee before i sold it and now i went to put them on my red/white and they are not fitting, when i put the bottom in and go to set the top mount into place the back side of the shock is hitting the back side of the shock mount on the lower a-arm and holding the top out about an inch or two, i have it jacked up all the way suspension at full drop, i let all the air outta the shock ect. but its still binding when i go to put it in.. i read the manual for em on foxs site and it says there should be no modding to a-arms or anything to get them on. it seems like i would have to grind about a half inch outta the back of the a-arm mount so they dont hit, i really dont wanna weaken the mount and i didnt look at the arms on the blue one before i sold it. does anyone have these shocks? and did they mount right up? i hope i explained good enough.. oh they are the 2008 model floats i believe without the rezzie also. thanks in advance Quote Link to comment Share on other sites More sharing options...
So Cal Suspension Posted December 13, 2011 Report Share Posted December 13, 2011 Pm me the serial number off one of the shocks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.