brock42 Posted December 10, 2011 Report Share Posted December 10, 2011 i was in the process of puttin my motor back in my banshee and saw two black hoses one coming from behind the motor mount and the other coming from the top of the transmission and was curious as to whatg they were thanks for any help Quote Link to comment Share on other sites More sharing options...
andrew3160 Posted December 10, 2011 Report Share Posted December 10, 2011 They are breather hoses for tranny pressure. Quote Link to comment Share on other sites More sharing options...
brock42 Posted December 10, 2011 Author Report Share Posted December 10, 2011 Ok thank you that's what I figured I was just going to make sure. So they need to be ran down to the back of the motor. Quote Link to comment Share on other sites More sharing options...
andrew3160 Posted December 10, 2011 Report Share Posted December 10, 2011 Yes Quote Link to comment Share on other sites More sharing options...
thomas h. Posted December 10, 2011 Report Share Posted December 10, 2011 Yamaha makes them go up then back by the overflow bottle then stop around the tail light I think it is to keep water from getting in to easily Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted December 11, 2011 Report Share Posted December 11, 2011 oh boy. yes the tranny pressure is relieved through those two hoses. but everyone is giving you different locations. This is where they are SUPPOSED TO BE ROUTED. One leaves the back of the motor by the motor mount.....its a bitch to get to. The other exits out the top of the clutch cover...... they JOIN UP using a T-fitting ABOVE THE motor towards the front of the bike.......then from there a single line (also attached to the T-fitting) runs them up near the handle bars. This is where they have them routed stock. Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted December 11, 2011 Report Share Posted December 11, 2011 oh boy. yes the tranny pressure is relieved through those two hoses. but everyone is giving you different locations. This is where they are SUPPOSED TO BE ROUTED. One leaves the back of the motor by the motor mount.....its a bitch to get to. The other exits out the top of the clutch cover...... they JOIN UP using a T-fitting ABOVE THE motor towards the front of the bike.......then from there a single line (also attached to the T-fitting) runs them up near the handle bars. This is where they have them routed stock. THis is correct, but to clarify, the T fitting is on top of the motor but under the carbs. Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted December 12, 2011 Report Share Posted December 12, 2011 thanks sandrider.....guess i didn't clarify that the T does go above the motor but under the carbs....my bad Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.