Loc Posted October 17, 2011 Report Share Posted October 17, 2011 Looking for a couple opinions. I will not be able to rip the Banshee apart for a week, so I am looking for an opinion. I was on my way back to the trailer this weekend and while riding in 2nd gear the Banshee quit putting power to the front sprocket. The motor still runs fine, and the transmission shifts fine, however no matter what gear she is in it will not turn the sprocket. Any ideas on what it could be before I rip it apart? I am guessing the gear that comes off the the output shaft came off or is loose. Quote Link to comment Share on other sites More sharing options...
BasicBajaX Posted October 17, 2011 Report Share Posted October 17, 2011 Dont bother looking just start ripping it apart... Quote Link to comment Share on other sites More sharing options...
Loc Posted October 17, 2011 Author Report Share Posted October 17, 2011 Clutch is good. The oil is still clean. It is a FAST clutch with about 10 hours on it. Quote Link to comment Share on other sites More sharing options...
coryv4 Posted October 17, 2011 Report Share Posted October 17, 2011 there is only 2 things that can be wrong with it. clutch or a the gears between the crank and the sprocket are broken. i am going with your clutch is fucked. i call burnt clutch Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.