Joejr915 Posted October 3, 2011 Report Share Posted October 3, 2011 i got a stock banshee with no porting and aftermarket reeds with stock carbs. dmc pipes and k&n pods and +4 timimg. my gas mixture is 32:1 what jets should i put in. And if i mix 40:1 what jets should i put in also. Quote Link to comment Share on other sites More sharing options...
apeik Posted October 3, 2011 Report Share Posted October 3, 2011 around 25 OR 27.5 pilot, needle in the middle clip and a 310 or 300 main, air screw 1.5 turns out to start, should be pretty close Quote Link to comment Share on other sites More sharing options...
shakar Posted October 4, 2011 Report Share Posted October 4, 2011 u at sealevel or?? Quote Link to comment Share on other sites More sharing options...
Joejr915 Posted October 4, 2011 Author Report Share Posted October 4, 2011 my elvation is about 1500 above sea level Quote Link to comment Share on other sites More sharing options...
SNTBANSHEE Posted October 4, 2011 Report Share Posted October 4, 2011 I run the same setup as you are and use 27.5 pilot, needle in middle clip and 320 mains. You will love the DMC pipes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.