stroking Posted October 1, 2011 Report Share Posted October 1, 2011 came out a stock cylinder 4mil.........anyone seen this happen before?? everything is good except this Quote Link to comment Share on other sites More sharing options...
#1JUANstunna Posted October 1, 2011 Report Share Posted October 1, 2011 I'd have to say it was some poor welding along with some binding of the drum. JMO from the pics. Quote Link to comment Share on other sites More sharing options...
BigNasty Posted October 6, 2011 Report Share Posted October 6, 2011 Ouch. Can't say I have. That could get ugly. Quote Link to comment Share on other sites More sharing options...
tortuga Posted October 10, 2011 Report Share Posted October 10, 2011 What kind of granny duneable or regular override? Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted October 11, 2011 Report Share Posted October 11, 2011 who cut it, and how experienced was the rider that was using it with an override? Quote Link to comment Share on other sites More sharing options...
camatv Posted October 11, 2011 Report Share Posted October 11, 2011 that drum looks like dog shit.. the star is wrong too. can a massive backload break one like that !! yikes Quote Link to comment Share on other sites More sharing options...
stroking Posted October 12, 2011 Author Report Share Posted October 12, 2011 (edited) rider down shifted without pulling clutch while still rolling pretty fast thats what the owner told me tranny is over a year old tranny is still good to go,i put another drum in with the same star and its shifting flawless Edited October 12, 2011 by stroking Quote Link to comment Share on other sites More sharing options...
dajogejr Posted October 13, 2011 Report Share Posted October 13, 2011 rider down shifted without pulling clutch while still rolling pretty fast thats what the owner told me tranny is over a year old tranny is still good to go,i put another drum in with the same star and its shifting flawless Yep...don't care who cuts it...that'll do it real quick. Lucky the racks weren't smoked. He broke the cheap parts...LOL. What people need to realize is that Overrides are almost in 2 gears at the same time, while that may be just fine for up shifting under full load, what they're designed to do..downshifting with a load, especially a backload...will cause big issues. Maybe not at lower speeds or less load from the motor, but most certainly at higher loads/speeds. I've seen shitty "looking" welds on override drums and they shift like a dream. They don't have to look pretty to work good. Got lucky my man... Quote Link to comment Share on other sites More sharing options...
stroking Posted October 14, 2011 Author Report Share Posted October 14, 2011 thats what i told the owner...(he got lucky).....and i had a drum already cut on the shelf im surprised that the shift forks didnt have a wear mark anywhere Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.