boise_banshee Posted September 18, 2011 Report Share Posted September 18, 2011 Parting out my Banshee. Majority of the parts were installed Feb. this year. I actually posted on here as I built it up and was done, with pics. Less than ten total rides on everything. The motor has 125 psi comp per cylinder, stock stroke/port and has very low hours on it. (This banshee sat for years in a friends garage before I bought it) Pulls Hard and starts right up. It has only had Klotz Techniplate 40:1 & Flexdrive 30 in it. It has never needed to be opened up beyond clutch side w/ the modds listed below. Please Cover the 3% Paypal fees, or send as gift. Thank You. The motor is staying together, so please do not PM or Post on individual parts on the motor. COMPLETE 04 BANSHEE MOTOR -- 1300 FAST Clutch w/light springs FAST New Shift Shaft w/mod FAST Idle Bushing Upgrade Magnum Billet Basket Cascade Pancake Bearing Cascade Modded Shift Star Cascade Polished Stator, Clutch & Water pump Covers New Water Pump Bearing Mull Engineering Pump Billet Gear Chariot Billet Intake Boysen Reed Cages w/ carbon pro petals Prodesign Billet Impeller Prodesign ez-drain Prodesign Cool Head w/22cc domes Prodesign Power Shifter Modquad Billet Kicker & Rebuilt Internals New Kicker Shaft seal Magnetic Oil Plug 1 set of NKG Iridium Plugs (in the box) 1 set NKG Plugs 8RBES (in the box) Also throw in several sealed bottles of Klotz Flex 30 and Techniplate Powder Coated Frame 04 (Title in Hand) and Hubs w/ new bearings--Primo Powder Coat/Meridian-- 375 Lonestar Chrome Rear Swingarm w/skid plate mount & TM Design chain guide kit/slider--600 Fullflight 3+1 cromoly heims & plate, a-arms +3+1 YFZ Set up--280 Elka Suspension Triple Rate Long Travel front shocks with Resivors YFZ Shock --590 (missing one adj knob cover, on left shock, does not effect adj, see photo) SS +3 Front Brake Lines -- 60 SS Rear Brake Line -- 20 Stock Rear Shock -- 100 Lonestar Chrome Steering Stem w/anti-vibe clamp--220 Gforce rear axle adj from +2-+4 -- 110 Trailtech Handlebars w/spyder grips -- 40 Trailtech Headlights -- 80 ASV Brake and Clutch levers -- 115 TerryCable Chrome Throtle Lever -- 70 Cascade Chrome Rear Brake lever -- 70 Tusk Rear Rotor -- 30 Stock Front Rotors -- 50 Chrome gas tank cover/dual pingle + tank -- 150 Billet gas cap w/billet vent -- 25 Braided ss clutch cable--20 Anodized blue front brake line clamp holders -- 20 Keihen PWK 28 Carbs with Uni Pod Filters, SS throtle cable (lots of extra jets, carb springs/gaskets too) --170 FMF SST Exhaust w/ Powercore 2 Silencers w/new packing --375 Modquad Chrome Pipe Hangers -- 25 Modquad Chrome Front Brake Ress Cap & Resivor -- 30 Modquad Chrome Billet Rear brake Ress -- 40 Rebuilt Rear Brake Caliper New Sintered pads & Tusk billet block off -- 80 Rebuilt Front Brake Calipers, New Sintered pads -- 120 Dynatek Cdi -- 160 Dynatek Ignition Coil --70 Stock Wire Harness -- 50 On/Off/Headlight Switch Assy -- 40 Plastics -- 100 Seat -- 50 PWR Radiator w/Billet Cap -- 280 PWR Radiator Hoses -- 50 Renthal Rear Sproket -- 30 Renthal Gold Chain -- 50 Stainless Bolt kit (couple minor bolts missing) -- 80 (But does come with additional "lower motor kit") Blue Alum. Anodized Flag Holder w/ New in wrap 6ft whip & flag kit -- 30 IMS ROLL Foot Pegs -- 125 SS wheels with like new dirt tires front/rear -- 220 ITP Sandstars on Douglas rims (still have wiskers on them) -- 130 Carb Sync Tool from f.a.s.t. -- 25 ATV hydro lift-- 50 ATV Ramps -- 50 Quote Link to comment Share on other sites More sharing options...
CFH87 Posted September 18, 2011 Report Share Posted September 18, 2011 How much complete? Quote Link to comment Share on other sites More sharing options...
boise_banshee Posted September 18, 2011 Author Report Share Posted September 18, 2011 How much complete? PM SENT Quote Link to comment Share on other sites More sharing options...
boise_banshee Posted September 18, 2011 Author Report Share Posted September 18, 2011 ALL PRICES ARE + SHIPPING Quote Link to comment Share on other sites More sharing options...
Infamous039 Posted September 18, 2011 Report Share Posted September 18, 2011 Pm sent for IMS pegs Quote Link to comment Share on other sites More sharing options...
barahonapr Posted September 18, 2011 Report Share Posted September 18, 2011 Pm sent on ramps and carbon sync tool Quote Link to comment Share on other sites More sharing options...
Nieskes Posted September 18, 2011 Report Share Posted September 18, 2011 pm sent on rear rotor and pipe clamps Quote Link to comment Share on other sites More sharing options...
Nieskes Posted September 18, 2011 Report Share Posted September 18, 2011 payment sent, thanks Quote Link to comment Share on other sites More sharing options...
boise_banshee Posted September 18, 2011 Author Report Share Posted September 18, 2011 payment sent, thanks PEGS, PIPE HANGERS & REAR ROTOR SOLD Quote Link to comment Share on other sites More sharing options...
boise_banshee Posted September 19, 2011 Author Report Share Posted September 19, 2011 REAR BRAKE SS LINE, SS CLUTCH LINE & ASV LEVERS SOLD Quote Link to comment Share on other sites More sharing options...
barahonapr Posted September 19, 2011 Report Share Posted September 19, 2011 Pm sent Quote Link to comment Share on other sites More sharing options...
boise_banshee Posted September 19, 2011 Author Report Share Posted September 19, 2011 Pm sent PM REPLIED Quote Link to comment Share on other sites More sharing options...
RippinBansh11 Posted September 19, 2011 Report Share Posted September 19, 2011 PM Sent!!! Quote Link to comment Share on other sites More sharing options...
jd250r Posted September 19, 2011 Report Share Posted September 19, 2011 Pm sent on stem, handle bars, carbs and paddles. Quote Link to comment Share on other sites More sharing options...
BadOmen Posted September 19, 2011 Report Share Posted September 19, 2011 PM'd Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.