mk2dubbin Posted September 17, 2011 Report Share Posted September 17, 2011 my banshee has been a little hard to start lately so i pulled the plugs today before going riding tomorrow. this is what i found. i am assuming this is just an accumulation of unburnt oil? i cleaned the plugs and it fired up in 4 kicks or so again, and then fired up on the first kick after shutting it off. seems to have been my issue, but let me know what you guys think. 40:1 Klotz supertechniplate 93 octane from Shell plugs probably have about 30 hours on them roughly 1,000ft elevation stock engine fmf fatty's with fresh repacked silencers fresh rebuild on carbs 280 mains on middle clip 27.5 pilots and about 0.5 turns out on the air screws prodesign foam filter with cut airbox lid Quote Link to comment Share on other sites More sharing options...
Zwiser Posted September 17, 2011 Report Share Posted September 17, 2011 ummm, those look horrible, id say your extremely rich bring your mains down to a 260, ans 25 pilots Quote Link to comment Share on other sites More sharing options...
Zwiser Posted September 17, 2011 Report Share Posted September 17, 2011 ummm, those look horrible, id say your extremely rich bring your mains down to a 260, ans 25 pilots Quote Link to comment Share on other sites More sharing options...
shakar Posted September 17, 2011 Report Share Posted September 17, 2011 those are spot on perfect.!! thats what mine looks like after a few min of riding hard........ way to go Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted September 18, 2011 Report Share Posted September 18, 2011 Shit can't be that far off if you got 30 hours on a set of plugs Quote Link to comment Share on other sites More sharing options...
Tedder Posted September 18, 2011 Report Share Posted September 18, 2011 I've never seen Klotz leave deposits like that. Mods list says @ 40:1 - Must be 40 parts oil to 1 part gas Quote Link to comment Share on other sites More sharing options...
SuperMex Posted September 18, 2011 Report Share Posted September 18, 2011 Can you please scrape away some of that gunk so we can try and read those plugs for you....Hahahahaa Quote Link to comment Share on other sites More sharing options...
06specialedition Posted September 18, 2011 Report Share Posted September 18, 2011 Quote Link to comment Share on other sites More sharing options...
Boone Posted September 21, 2011 Report Share Posted September 21, 2011 Damn Dude.. Quote Link to comment Share on other sites More sharing options...
volcrano Posted September 28, 2011 Report Share Posted September 28, 2011 What kind of shitty plug is that??put a b8es in there and check them after those color.u might be using wrong heat range plug.b8es ngk ftw. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.