BigRed350x Posted September 5, 2011 Report Share Posted September 5, 2011 (edited) This is Curt's old top end and cases. The cylinders are at 66mm bore, and have some scratches around the exhaust port on one cylinder, and in a couple spots in the other cylinder. I honed them and cleaned them up as best I could. You could bore them out to the .100 over max stock cylinders will let you go, or you could buy a new 66mm top end and just run them as they are. (I would run them the way they are if I were going to keep it.) That being said, I'm not going to ask a whole lot for them. They are runnable, but are on the last bore and have scratches in them. BUT these cylinders did make 100hp with shearer's and 34PJ carbs back in Kansas a few years ago. This top end rips hard. FAST drag ported 4mil cylinders. 66mm bore, Polished. $125 Pro-Design Cool Head w/ 18cc Domes cut for the FAST cylinders. $165 Powder-coated Candy Blue cases w/ chain whack. No cracks or leaks from chain whack. Port-Matched to FAST Cylinders. $200 Intakes for 33-35mm Carbs. $45 Everything for $450 shipped. OBO! I also have a WCR 2-5 Override, Stator, Flywheel, Kicker Gear, Idler Gear... I have almost everything you'd need to make a complete engine. If you want any of the other extra stuff let me know and I'll make you a deal. This is a great setup for someone wanting to get into the drag racing stuff without busting the bank. This top end ran consistent 4.0's and made 100hp. Don't be afraid to make offers!! Picture of the scratches on the cylinder walls. Same sort of thing around the exhaust port. This stuff is off of this bike... 325lb Rider on this engine against Hansen Performance's 4-stroke wars 2nd place winning 450. http://s260.photobucket.com/albums/ii14/WyoBanshee/St%20Anthony%20Sand%20Dunes/?action=view¤t=MOV00052.mp4 Edited September 5, 2011 by BigRed350x Quote Link to comment Share on other sites More sharing options...
bigblockbanshee Posted September 5, 2011 Report Share Posted September 5, 2011 PM sent on intakes... Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted September 5, 2011 Author Report Share Posted September 5, 2011 PM returned. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted September 5, 2011 Author Report Share Posted September 5, 2011 Sorry, here's the pic that photobucket says was moved. My bad. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted September 5, 2011 Author Report Share Posted September 5, 2011 All PM's returned... Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted September 5, 2011 Author Report Share Posted September 5, 2011 Intakes SOLD! Quote Link to comment Share on other sites More sharing options...
tz racin Posted September 5, 2011 Report Share Posted September 5, 2011 Cylinders 125 shipped? Then id take em i pm u pay info thanks u send invoice Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted September 6, 2011 Author Report Share Posted September 6, 2011 Cylinders 125 shipped? Then id take em i pm u pay info thanks u send invoice Invoice Sent through Paypal. PM returned. The domes are cut to match the cylinders and the cases are port-matched to the cylinders. Sure you don't want any of the other stuff with the cylinders? Thanks - Jared Quote Link to comment Share on other sites More sharing options...
RollinRhino Posted September 6, 2011 Report Share Posted September 6, 2011 Smoking deal on those cases. Kind of giving them away. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted September 6, 2011 Author Report Share Posted September 6, 2011 Smoking deal on those cases. Kind of giving them away. Yeah, I hope someone snags them quick... I've got some parts I'd like to order for my sandrail. lol Quote Link to comment Share on other sites More sharing options...
eric b Posted September 6, 2011 Report Share Posted September 6, 2011 Pm sent Quote Link to comment Share on other sites More sharing options...
tz racin Posted September 6, 2011 Report Share Posted September 6, 2011 Cyls paid Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted September 6, 2011 Report Share Posted September 6, 2011 Can you PM me condition and price on stator and flywheel when you get a moment... Thanks Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted September 6, 2011 Author Report Share Posted September 6, 2011 CYLINDERS SOLD! INTAKES SOLD! I'll try and get stuff shipped out here in the next couple days guys. I'll PM each of you your tracking info once the stuff is on the way. Cases, cool head and domes still available. - Jared Quote Link to comment Share on other sites More sharing options...
tz racin Posted September 6, 2011 Report Share Posted September 6, 2011 Hey whats compression ratio with those domes and where u using wiseco 795 pistons with those domes also, thanks for cylinders bud Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.