SuperMex Posted October 14, 2011 Author Report Share Posted October 14, 2011 Why does the title say dyno #'s when there are none? This thread sucks. I that your Mom swallowing that? Quote Link to comment Share on other sites More sharing options...
camatv Posted October 15, 2011 Report Share Posted October 15, 2011 thats funny right there i dont care who you are.. Quote Link to comment Share on other sites More sharing options...
SuperMex Posted October 15, 2011 Author Report Share Posted October 15, 2011 Hahahahaha I couldn't help myself. As for dyno numbers I will have some for you guys after my Glamis trip which is November 11th I am just to busy till then to do it. But don't worry I will have some numbers on my 421 Serval w/ R-2s and w/ Shearers. Quote Link to comment Share on other sites More sharing options...
RZBansheeMan Posted October 15, 2011 Report Share Posted October 15, 2011 DO IT !! I'm very interested in the numbers. Quote Link to comment Share on other sites More sharing options...
superbanshee Posted October 16, 2011 Report Share Posted October 16, 2011 Can't wait to see the numbers. I have shearers with a similar setup. Quote Link to comment Share on other sites More sharing options...
figaro Posted October 18, 2011 Report Share Posted October 18, 2011 for suspension talk to socal suspension. theres alot of junk on ebay. thanks will look into it. i should be buying the banshee suspention and kits this coming weekend so will post pictures of them for the thread. this is what i want http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&vxp=mtr&item=380374734571 what do you guys think?? Quote Link to comment Share on other sites More sharing options...
figaro Posted October 18, 2011 Report Share Posted October 18, 2011 Hahahahaha I couldn't help myself. As for dyno numbers I will have some for you guys after my Glamis trip which is November 11th I am just to busy till then to do it. But don't worry I will have some numbers on my 421 Serval w/ R-2s and w/ Shearers. i was waiting on this thread to buy the same setup on my banshee after you did the numbers but that's too bad because November is too late for me so i might just go ahead and buy the stuff in the coming weeks. i will try and hold off the engine stuff as you might post something. so i will start with the suspension and the carbs clutch etc... i hope you can do it sooner Quote Link to comment Share on other sites More sharing options...
SuperMex Posted November 14, 2011 Author Report Share Posted November 14, 2011 Ok, I ran my Serval hard this weekend in Glamis and my only problem I had was traction. The engine has a beautiful power band for duning, You will need to run more paddle and tire than my 20-10-10 9 paddle haulers in my opinion as you won't pull as hard as the engine wants due to the tires spinning from the added torque. Other than that everything was awesome, lugged her down low in the big dunes and she pulls like a horse and screams through the big bowls and up the hills like a raped ape. I ran my R-2s on this trip and they can be lugged way down low and still over rev on top and pull hard forever. I will schedule some dyno time at Wicked ATV now and get you guys some numbers on the R-2s vs. Shearers. Quote Link to comment Share on other sites More sharing options...
Azryll Posted November 15, 2011 Report Share Posted November 15, 2011 22x11x8's ftw, those in a 9 or 10 paddle will hook up much better. My 20's with 10 in rims were good for turning on a dime but sucked at hook up. Bigger tire with more sidewall will help tons. Quote Link to comment Share on other sites More sharing options...
06specialedition Posted November 15, 2011 Report Share Posted November 15, 2011 22x11x8's ftw, those in a 9 or 10 paddle will hook up much better. My 20's with 10 in rims were good for turning on a dime but sucked at hook up. Bigger tire with more sidewall will help tons. X2, more sidewall makes a difference. I've never cared much for 10 inch rear wheels in the sand. Can't wait to see your dyno #'s Quote Link to comment Share on other sites More sharing options...
guns4children Posted November 15, 2011 Report Share Posted November 15, 2011 Quote Link to comment Share on other sites More sharing options...
figaro Posted November 16, 2011 Report Share Posted November 16, 2011 I got the serval from M&M but i need help. will i be able to install the serval kit and tz bearings with max load ? or is it easy to install my any bike shop I have almost half my parts but still waiting on the R2 pips i payed last month for them from the guy you guys recommended also my swing arms from steller and a-arms from fireball and suspension atv galixy full stage 3 elka dune editon nothing is sent Quote Link to comment Share on other sites More sharing options...
2004LEBanshee Posted November 16, 2011 Report Share Posted November 16, 2011 not sure what the question is but the crank bearings will need pressed on. Quote Link to comment Share on other sites More sharing options...
guns4children Posted November 16, 2011 Report Share Posted November 16, 2011 Tom strikes again! Quote Link to comment Share on other sites More sharing options...
figaro Posted November 16, 2011 Report Share Posted November 16, 2011 Tom strikes again! I think I am going to cancel my order because i will be traveling overseas and want to ship my parts before so they get there on time to build for the season. I have 21 days left and I am held up my my elkas and TOM R2s I ordered them last month and paid November 28 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.