youngshee Posted August 18, 2011 Report Share Posted August 18, 2011 Please call me tomorrow as i dont have a pm in my inbox from you youngshee.. My work schedule sucks right now so i cant really call right now, so ill try it again Quote Link to comment Share on other sites More sharing options...
bmfx1 Posted August 19, 2011 Report Share Posted August 19, 2011 Jeff is a busy man, I called twice today trying to talk with him, but was told he was busy. I'll be sending you my cylinders for a 4mil build up Jeff. Just bought this banshee last week (knowing the engine was toast) finally got the time to tear it down. I'm over here working on these fires here in Texas, I hope you can get to my cylinders before they decide to send me home Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted August 19, 2011 Report Share Posted August 19, 2011 Jeff is a busy man, I called twice today trying to talk with him, but was told he was busy. I'll be sending you my cylinders for a 4mil build up Jeff. Just bought this banshee last week (knowing the engine was toast) finally got the time to tear it down. I'm over here working on these fires here in Texas, I hope you can get to my cylinders before they decide to send me home Sorry i missed you, Nick quit us last Friday so Cody and I are going like mad trying to catch up. You will get our best work and good luck with those fires. Heard its hot as he$$ down there too. : ( Quote Link to comment Share on other sites More sharing options...
bmfx1 Posted August 19, 2011 Report Share Posted August 19, 2011 Sorry i missed you, Nick quit us last Friday so Cody and I are going like mad trying to catch up. You will get our best work and good luck with those fires. Heard its hot as he$$ down there too. : ( Ah, no problem about being busy, I can understand. Sorry to hear someone bailed on ya. As for the fires, yeah the weather has been working against us, hot as he$$ and have had several storms go around Texas. That's the way it goes sometimes. Anyway, I'll catch up with you sooner or later on the phone Jeff, thanks for your reply. Quote Link to comment Share on other sites More sharing options...
SandSlingerOR Posted August 20, 2011 Report Share Posted August 20, 2011 Can pc's be used with serval? Quote Link to comment Share on other sites More sharing options...
AKheathen Posted August 20, 2011 Report Share Posted August 20, 2011 Can pc's be used with serval? and how...... not sure about what kind of rev-out pc's will allow, but they do mate well within it's profile... Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted August 20, 2011 Report Share Posted August 20, 2011 Can pc's be used with serval? Yes , they run well . We had a customer up in Oregon do some dyno runs with good results. I would have to dig up the post but its on here somewhere. Quote Link to comment Share on other sites More sharing options...
AKheathen Posted August 20, 2011 Report Share Posted August 20, 2011 Yes , they run well . We had a customer up in Oregon do some dyno runs with good results. I would have to dig up the post but its on here somewhere. was that snopczinsci? haven't kept racl lately... Quote Link to comment Share on other sites More sharing options...
coryv4 Posted August 20, 2011 Report Share Posted August 20, 2011 Can pc's be used with serval? i run pcs on my 421 serval great pipe for trail and play riding but it is a pretty much a mid range pipe pulls like a mofo mid range then smooths out on the top end Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted August 21, 2011 Report Share Posted August 21, 2011 yes his friend anyway. Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted August 21, 2011 Report Share Posted August 21, 2011 Here's that thread you were talking about Jeff. http://bansheehq.com/forums/index.php?showtopic=144563&st=0&p=1246661&fromsearch=1entry1246661 Quote Link to comment Share on other sites More sharing options...
2004LEBanshee Posted August 21, 2011 Report Share Posted August 21, 2011 If I switched over when I need a rebuild do I need to run a lockup and/or overide? Already running a billet basket and a FAST clutch. What else would I need to make the set up work. Curently running. 4 Mill Fast Dune port stock cyl. Noss head domes cut for 50/50 race pump VF2 reeds PWK 35's CPI inframes Timing advanced. Lightned flywheel. Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted August 22, 2011 Report Share Posted August 22, 2011 We have gotten by just fine with our clutch and some shifting mods. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted August 22, 2011 Report Share Posted August 22, 2011 We have gotten by just fine with our clutch and some shifting mods. Quote Link to comment Share on other sites More sharing options...
camatv Posted August 22, 2011 Report Share Posted August 22, 2011 you can type hell on here.. as far as i know this site isnt rated G Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.