DirtDiggler69 Posted July 30, 2011 Report Share Posted July 30, 2011 I have a PJ 38mm I got for my Banshee 2-1 . I was told by more than a few that the 38 may be kinda big and that intake velocity will suffer . I may be able to trade it for a PWK 33 . I typically see the PWK 35 on the 2-1 set ups . what would the 33 lack? any input ? Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted July 30, 2011 Report Share Posted July 30, 2011 i ran a 33 for a long time on mine.. i loved it.. i just swapped to a 36mm and its ok also.. i liked the 33 better.. Quote Link to comment Share on other sites More sharing options...
BansheeBoy347 Posted July 30, 2011 Report Share Posted July 30, 2011 I run a 40mm Lectron with a motofast 2-1 intake and they work awesome. Quote Link to comment Share on other sites More sharing options...
Burt Reynolds Posted July 30, 2011 Report Share Posted July 30, 2011 The 40mm lectron works because it can mimick a smaller carb i was told. 33-35mm carb is ideal on a bike that isnt modded to hell and back. I had a 33 on mine and that seemed to be the sweet spot Quote Link to comment Share on other sites More sharing options...
bigjohnsonjeeps Posted August 8, 2011 Report Share Posted August 8, 2011 I have the Keihin 35mm on mine with the 2 into 1 Trinity. I'm having a hell of a time trying to get it jetted ( pilot and needle ). I think the carb is to big wont idle very well and the idle screw is all the way up. The 33mm would be better for a less modded bike. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.