BrockMoto Posted July 28, 2011 Report Share Posted July 28, 2011 would like to have my springs coated... how do I take them off the shock ?? Quote Link to comment Share on other sites More sharing options...
shakar Posted July 30, 2011 Report Share Posted July 30, 2011 i was wondering the same thing?? any1?? Quote Link to comment Share on other sites More sharing options...
So Cal Suspension Posted July 30, 2011 Report Share Posted July 30, 2011 i was wondering the same thing?? any1?? On banshee shocks, you have to unthread the lower eyelet to remove the spring. Unless you have access to a spring compressor, I wouldn't attempt it. Quote Link to comment Share on other sites More sharing options...
camatv Posted July 30, 2011 Report Share Posted July 30, 2011 the rear you just loosen up the top threaded preload adjuster, and slip the clip off and remove the spring. rears are easy i wouldnt waste the $$ on the fronts. Quote Link to comment Share on other sites More sharing options...
chetgoff Posted July 31, 2011 Report Share Posted July 31, 2011 I had found a cool video on the internet a while back I was needing to install new springs on my rhino so this video show you how to use four ratching tie downs with no hooks. Feed the tie downs inside the spring and back up to the top and ratchet 2 at a time doing it as evenly as possible. It really worked great for me just have to be careful when taking the tiedowns off. I will try to find the video. Also on e-bay they say spring compressors for atv shocks pretty cheap. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.