Valin Posted July 16, 2011 Report Share Posted July 16, 2011 (edited) I am toying with the idea of parting out this bike instead of selling it as a whole. There are literally about 10 minutes total of test time on all of these parts. Everything is basically new. Here are the parts that I will be selling: Motor: 421cc Cheetah - 68mm bore Polished Cheetah Powervalve cylinders, 23cc pump gas domes, and 19cc domes for 110 octane race fuel, Polished Cheetah head cover, 4mm Hotrods stroker longrod crankshaft, Chariot Racing billet intakes, V-Force 3 reeds, adjustable stator plate, billet water pump impeller, billet 3 piece stator cover, billet water cover, chrome clutch cover insert, Tusk racing clutch with HD springs, billet oil dipstick, powdercoated wet black kicker, clutch cover, and motor mounts - $3200 Pipes: chrome original in frame Rocket pipes with billet exhaust clamps - no dents or scratches, polished silencers - $450 YFZ450 front a-arms, polished aluminum upper arm, powder coated lower arm, YFZ450 spindles and rotors, YFZ450 larger ball joints, extended steering rods, Elka Duner front YFZ450 shocks - $600 Keihin 35mm PWK carburetors, Chariot Racing billet float bowls, throttle cable, K&N Filters with outerwears - $500 Laker custom black front and rear fenders - $400 complete set of Maxxis Razr 2 tires on stock wheels - $350 Billet Pingel dual outlet fuel valve with screen - $75 Billet front and rear exhaust hangers - $40 Billet JDS tribal flame front grille - $55 Billet gas cap and blue breather hose - $40 Throttle block with billet cover - $40 ODI lock-on grips - $20 Billet rear brake reservoir and cap - $50 Braided stainless steel front and rear brake lines (works on up to +2 front ends, and +4 swingers) - $70 Yamaha R1 rear master cylinder, polished lettering - $60 Renthal handlebars and pad - powdercoated wet black - $25 Billet handlebar clamp - $20 ASV black clutch lever - $75 Chrome Tarantula racing rear grab bar - $80 Billet R.I.S. designs front bumper - $130 Chrome Trailtech headlights - $90 Yamaha R6 LED rear tail light - $40 polished aluminum nerf bars with black nets - $100 4" extended swingarm, stock carrier with new bearings, seals - both powdercoated wet black - $175 Stock rear shock, polished ressie, wet black powdercoated spring - $100 rear hubs, brake hub with rotor, and sprocket hub with stock sprocket - powdercoated red - $60 Modquad complete black chain guide set - $60 D.I.D. gold x-ring chain for longer swingarm - $75 chrome Geforce adjustable +4" rear axle - $160 All parts will include AlloyBoltz polished mounting nuts / bolts / washers, where applicable. If the big stuff does not sell, the bike will not be parted out. These pictures should just about cover everything: Edited July 16, 2011 by Valin Quote Link to comment Share on other sites More sharing options...
Valin Posted July 16, 2011 Author Report Share Posted July 16, 2011 More. Quote Link to comment Share on other sites More sharing options...
Nieskes Posted July 16, 2011 Report Share Posted July 16, 2011 pm senf Quote Link to comment Share on other sites More sharing options...
slag_350300 Posted July 16, 2011 Report Share Posted July 16, 2011 I'll take the front suspension setup, pm me Quote Link to comment Share on other sites More sharing options...
madjimmax Posted July 16, 2011 Report Share Posted July 16, 2011 I'll take the Rockets sending PM Quote Link to comment Share on other sites More sharing options...
Valin Posted July 16, 2011 Author Report Share Posted July 16, 2011 Stuff that has already been spoken for: Rockets YZF complete front end Billet gas cap R1 Master cylinder billet exhaust pipe hangers Quote Link to comment Share on other sites More sharing options...
Valin Posted July 16, 2011 Author Report Share Posted July 16, 2011 Swinger, carrier, and rear shock are spoken for. Quote Link to comment Share on other sites More sharing options...
steady Posted July 17, 2011 Report Share Posted July 17, 2011 pm sent Quote Link to comment Share on other sites More sharing options...
kodie Posted July 17, 2011 Report Share Posted July 17, 2011 is that 400 shipped for the plastics? Quote Link to comment Share on other sites More sharing options...
Valin Posted July 17, 2011 Author Report Share Posted July 17, 2011 There is a sale pending on the motor. No, that is not shipped for the plastics. Shipping will be additional. Note about the plastics: The Laker plastics will now come with the JDS billet tribal flame grille, as shown in the pictures, at no additional cost. I am doing this because I have misplaced the original Laker grille. Quote Link to comment Share on other sites More sharing options...
1999bluer6 Posted July 17, 2011 Report Share Posted July 17, 2011 How much hp does your motor make from that bike? Thanks Quote Link to comment Share on other sites More sharing options...
Valin Posted July 17, 2011 Author Report Share Posted July 17, 2011 I have not had it dyno'd. M&M says it should be about 85 whp, on pump. Quote Link to comment Share on other sites More sharing options...
2s RIDER Posted July 18, 2011 Report Share Posted July 18, 2011 how good a shape are the wheels in will ya seperate them I rilly just need the tires Quote Link to comment Share on other sites More sharing options...
meddle636 Posted July 18, 2011 Report Share Posted July 18, 2011 How much for the asv levers? Quote Link to comment Share on other sites More sharing options...
Valin Posted July 18, 2011 Author Report Share Posted July 18, 2011 (edited) how good a shape are the wheels in will ya seperate them I rilly just need the tires The wheels are in excellent shape. They are straight, no dents or dings. I suppose I would consider selling them seperate, but since it will cost me money to remove the tires, I'm not real crazy about the idea. How much for the asv levers? The clutch lever is listed at $75. Edited July 18, 2011 by Valin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.