muggzy Posted July 12, 2011 Report Share Posted July 12, 2011 Hey Guys, I’m helping a friend unload some engine parts. All prices include shipping. If the pic is gone, then so is the part. Set of cylinders measured @ 66.2mm, ported for short track/trail by Don Jones. You PA guys will know the name – this is the guy that built the engine on the bike ridden by that girl who was winning every race about 5 yrs back. You can still see the cross hatching but they’re gonna need to be honed. $225: Trinity Stage IV Cool Head w/21cc domes (includes the acorn nuts shown in the pic above) and new o-ring set $160: VForce 3 Reeds and cages: $150 Set of all three above: $420 Clean case set, no chain whack, a little surface oxidation on the outside; $150 Stock clutch basket with adjuster (not shown) ; $60 Stock crankshaft and connecting rods: $115 Tranny with bearings: $115 Reed Spacers (5/16”) with screws: $20 Stock cross over tube: $15 I think the prices are reasonable but if anything is out of line, let me know. Quote Link to comment Share on other sites More sharing options...
banshee4231 Posted July 15, 2011 Report Share Posted July 15, 2011 Hey Guys, I’m helping a friend unload some engine parts. All prices include shipping. If the pic is gone, then so is the part. Set of cylinders measured @ 66.2mm, ported for short track/trail by Don Jones. You PA guys will know the name – this is the guy that built the engine on the bike ridden by that girl who was winning every race about 5 yrs back. You can still see the cross hatching but they’re gonna need to be honed. $225: WILL YOU TAKE 100 SHIPPED FOR THE VF3 ? Trinity Stage IV Cool Head w/21cc domes (includes the acorn nuts shown in the pic above) and new o-ring set $160: VForce 3 Reeds and cages: $150 Set of all three above: $420 Clean case set, no chain whack, a little surface oxidation on the outside; $150 Stock clutch basket with adjuster (not shown) ; $60 Stock crankshaft and connecting rods: $115 Tranny with bearings: $115 Reed Spacers (5/16”) with screws: $20 Stock cross over tube: $15 I think the prices are reasonable but if anything is out of line, let me know. Quote Link to comment Share on other sites More sharing options...
Trueblown Posted July 18, 2011 Report Share Posted July 18, 2011 How about 150 for the vf3 and spacers? Quote Link to comment Share on other sites More sharing options...
muggzy Posted July 18, 2011 Author Report Share Posted July 18, 2011 How about 150 for the vf3 and spacers? PM sent Quote Link to comment Share on other sites More sharing options...
notsed Posted July 18, 2011 Report Share Posted July 18, 2011 pm sent Trinity Stage IV Cool Head w/21cc domes (includes the acorn nuts shown in the pic above) and new o-ring set $160: VForce 3 Reeds and cages: $150 Set of all three above: $420 Clean case set, no chain whack, a little surface oxidation on the outside; $150 Stock clutch basket with adjuster (not shown) ; $60 Stock crankshaft and connecting rods: $115 Tranny with bearings: $115 Reed Spacers (5/16”) with screws: $20 Stock cross over tube: $15 I think the prices are reasonable but if anything is out of line, let me know. Quote Link to comment Share on other sites More sharing options...
muggzy Posted July 19, 2011 Author Report Share Posted July 19, 2011 bump... This is good clean stuff guys. Maybe not spit shined but very clean, very usable parts. Quote Link to comment Share on other sites More sharing options...
Fakkundo Posted July 19, 2011 Report Share Posted July 19, 2011 PM'd you Quote Link to comment Share on other sites More sharing options...
muggzy Posted July 22, 2011 Author Report Share Posted July 22, 2011 bump... This is good clean stuff guys. Maybe not spit shined but very clean, very usable parts. Like I said "If the picture is still up, the parts are still available." Seems to be a lot of people saying "yeah I'll take so and so" then don't come through with the paypal $$ btw, someone pointed out that there are studs missing from the case. This was true when the pic was taken but they will be installed before shipping. Guaranteed. Quote Link to comment Share on other sites More sharing options...
252wheelieking Posted July 24, 2011 Report Share Posted July 24, 2011 How many hours on the crank? Has it been trued & weld? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.