yamahaman244 Posted July 11, 2011 Report Share Posted July 11, 2011 hey guys im getting my top end all done its gunna be wisco prolites 40 over and a mild port other mods are boysee reeds t6 pipes lid off airbox now qustion is will i be able to feel the differance with mild porting and fresh top end at 40 over im excited to get it back together Quote Link to comment Share on other sites More sharing options...
06specialedition Posted July 11, 2011 Report Share Posted July 11, 2011 Who is doing your porting? The porting is where you will see your HP gains. Quote Link to comment Share on other sites More sharing options...
SOUTHTHIRTY Posted July 13, 2011 Report Share Posted July 13, 2011 ? Quote Link to comment Share on other sites More sharing options...
zach15 Posted July 13, 2011 Report Share Posted July 13, 2011 yes you will feel the port work and if they know what they are doing you'll really feel it my banshee on stock stroke and a 65.50 bore ported 34 carbs cool head 18cc chambers open uni air filters adv timing and shearer pipes and it makes just at 74hp and i only have 1800$ in the bike including buying it Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted July 13, 2011 Report Share Posted July 13, 2011 Depends what a "mild" port job is. More info? Check your crank the best you can while jugs are off. Look at your reeds real close too. Now would be a good time to up-date to good dual stage. If you replace them, port the cages while apart. Use loctite on screws. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.